4 CH 20mA Remote Input Module UIO-4IN-20mA
Ethernet to RS485 Converter UC-ETH-RS485
Features * Works with all type of industrial equipments – PC, PLC, SCADA, HMI, AC/DC Drives, Genset, UPS, Development Kits, etc. * RS485 Rx and Tx light indications for easy visibility and troubleshooting * RJ45 Status light indications, RJ45 built-in 2KV isolation * User Friendly Configuration Software * Easy to use web page configuration option * Unique MAC address * Compact design suitable for both DIN Rail and Wall mount * Support 10/100M, TCP Server, TCP Client, UDP, Httpd Client, Web socket * Supports Transparent Mode data transmission * Supports Modbus TCP to Modbus RTU protocol conversion * ESD and Surge protection for Ethernet, RS485 and Power * Supports all Baud Rates from 300 to 250 kBaud.– varies on cable length * Supports up-to 256 receivers on the bus – also depends on the other devices connected in the RS485 network * ESD protection for RS485 pins – ±15-kV Human-Body Model (HBM) – ±8-kV IEC1000-4-2, Contact Discharge – ±15-kV IEC1000-4-2, Air-Gap Discharge * 1 Year Warranty against any manufacturing defects
Isolated 20mA splitter VW-HT-I222
RS232 To RS485/422 Active Digital isolated Converter
RS485 to RS485 Repeater UC-RS485-RS485
Connecting to Industrial Field buses, remote devices to a latest Computer becomes difficult due to obsolete of the RS232C ports by Computer Manufactures. But with the vast use of equipments with these interfaces needs a connection with PC for monitoring, configuring and working. Most of the market available converters are not equipments with proper ESD protection circuits to work longer and with an industry equipment. So we have our most suitable converter for both Industrial environment and general usage.
Supports Auto-Direction Control. * Supports all Baud Rates from 300 to 250 kBaud. - actual baud rate varies on the cable length * Supports up-to 256 receivers on the bus – also depends on the other devices connected in the RS485 network * Works with all type of industrial equipments – PC, PLC, SCADA, HMI, AC/DC Drives, Genset, UPS, Development Kits, etc. * RS485 Rx and Tx light indications for easy visibility and troubleshooting * ESD protection for and RS485 pins at both ends
Surge Protection Device 230V SPD / Single Phase SPD
Three-stage SPD230V surge protection device meets standard protection against power surges, voltage surges and disturbances with three stages of protection. Housed in a din rail panel mount case with a protected earth ground. In order to work properly, it is important to have a good connection in E terminal to solid earth ground. Unknown electronic device failure and misbehave in controller units might be avoided by using SPD-230V
Surge Protection Device 24V DC SPD
Three-stage SPD-24V-DC surge protection device meets standard protection against power surges, voltage surges and disturbances with three stages of protection. Housed in a din rail panel mount case with a protected earth ground. In order to work properly, it is important to have a good connection in E terminal to solid earth ground. Unknown electronic device failure and misbehave in controller units might be avoided by using SPD-24V-DC Features:- 1. Protection provided by high energy MOV and TVS 2. Internal thermal disconnects 3. Status indicator input and output 4. Replaceable modular design, DIN Rail compatible base Application:- All types 24V-DC PLC, HMI, etc., Where to Use: Noisy industrial lines like DC inductive load switching Industrial power panels Requiring a Load dump feature open Long DC caballing in panel board
Surge Protection Device RS485 SPD-RS485
Three-stage SPD485 surge protection device meets standard protection against power surges, voltage surges, common mode line noise and disturbances with three stages of protection and filter each supported with Transient Voltage Suppressor (TVS). Housed in a din rail panel mount case with a protected earth ground. In order to work properly, it is important to have a good connection in E terminal to solid earth ground.
USB to RS232 Converter UC-RS232
*Connecting to Industrial Field buses, remote devices to a latest Computer becomes difficult due to obsolete of the RS232C ports by Computer Manufactures.
*But with the vast use of equipments with these interfaces needs a connection with PC for monitoring, configuring and working.
*Most of the market available converters are not equipments with proper ESD protection circuits to work longer and with an industry equipment.
*So we have our most suitable converter for both Industrial environment and general usage.
In most case of Windows 10/11 and Linux the driver will be installed automatically when the PC is connected to the Internet. https://ftdichip.com/wp-content/uploads/2023/09/CDM-v2.12.36.4-WHQL-Certified.zip
USB to RS485 Converter UC-RS485
*Connecting to Industrial Field buses, remote devices to a latest Computer becomes difficult due to obsolete of the RS232C ports by Computer Manufactures.
*But with the vast use of equipments with these interfaces needs a connection with PC for monitoring, configuring and working.
*Most of the market available converters are not equipments with proper ESD protection circuits to work longer and with an industry equipment.
*So we have our most suitable converter for both Industrial environment and general usage.
In most case of Windows 10/11 and Linux the driver will be installed automatically when the PC is connected to the Internet. https://ftdichip.com/wp-content/uploads/2023/09/CDM-v2.12.36.4-WHQL-Certified.zip