2 Channel Digital Input Modbus RTU RS485 Module
Original price was: ₹3,500.00.₹1,650.00Current price is: ₹1,650.00.
- Multiple Digital Sensors support
Modbus RS-485 Protocol Interface.
Convenient address selection dip switch from 1 – 15 Address
Complete range of baud rate settings supported
Sensor open indication, Analog values in integer and float values
Product Dimensions 60mm x 50mm x 20mm (L x W x H)
2 Channel Isolated Digital Input Modbus RTU RS485 Module
2 Isolated Digital Inputs, 5~24V compatible
2 High speed Production counter and RPM measurement
All Inputs has latched status, Never miss an input change
All Inputs has individual counter functions
Modbus RTU over RS-485
Dip address switch for address selection from 1 to 15
Wide Supported baud rates from 300 to 115200
Dimensions: 60mm x 50mm x 20mm (L x W x H)
Compact Modbus RTU remote I/O module with two isolated digital inputs, pulse counting, RPM calculation.
Configuration Software
| Brand | Veawe |
|---|---|
| Bus Interface Type | RS485 |
| Channels | 2 channel |
| Country of Origin | Made in India |
| Isolation | Isolated Inputs |
| Mounting Type | DIN Rail, Wall Mount |
| Supply Voltage | 24V DC, 5V – USB Powered |
| USB Type | Type C |
| Warranty | 1 Year |
| Protocol | Modbus RTU |
| Part No | MIO-ISO-2DI |
| Control Type | Digital |
| Dimensions | 60mm x 50mm x 20mm |
You may also like…
2 Channel Analog Input Modbus RTU RS485 Module
- One 0 – 20mA and one 0 – 36V DC Analog Inputs
- 16-bit analog resolution
- Modbus RS-485 Protocol Interface.
- Integer and IEEE754 float value support
- Offset and Gain support
- Convenient address selection dip switch from 1 – 15 Address
- Complete range of baud rate settings supported
- Sensor open indication, Analog values in integer and float values
- DIN Rail mount support
- Product Dimensions 60mm x 50mm x 20mm (L x W x H)
Surge Protection Device RS485 SPD-RS485
Three-stage SPD485 surge protection device meets standard protection against power surges, voltage surges,
common mode line noise and disturbances with three stages of protection and filter each supported with Transient
Voltage Suppressor (TVS).
Housed in a din rail panel mount case with a protected earth ground.
In order to work properly, it is important to have a good connection in E terminal to solid earth ground.
USB to RS485 Converter UC-RS485
*Connecting to Industrial Field buses, remote devices to a latest Computer becomes
difficult due to obsolete of the RS232C ports by Computer Manufactures.
*But with the vast use of equipments with these interfaces needs a connection with PC for monitoring, configuring and working.
*Most of the market available converters are not equipments with proper ESD protection circuits to work longer and with an industry equipment.
*So we have our most suitable converter for both Industrial environment and general usage.
In most case of Windows 10/11 and Linux the driver will be installed automatically when the PC is connected to the Internet.
https://ftdichip.com/wp-content/uploads/2023/09/CDM-v2.12.36.4-WHQL-Certified.zip
Related products
4 Digital Input 4 Digital Output Modbus Module UIO-4DI4DO
- 4 digital inputs and 4 digital outputs with LED indication for all IO’s
- RS485 interface output with Modbus RTU Slave
- Suitable for all types of Industrial Machine Automation, IoT, IO Expansion, Remote monitoring
- Convenient address selection rotatory switch from 1 – 99 Address
- Complete range of baud rate settings supported
- Suitable for both Din Rail and Wall Mountable
Product Dimensions 110mm x 50mm x 55mm (L x W x H)
8 Channel 20mA Modbus Input Module UIO-8IN-20mA
-
Key Features
- 8 Channel 0–20mA Analog Inputs
- 16-bit analog resolution
- Factory calibrated accuracy: ± 0.1% from upper-range
- Raw analog value resolution in steps of 0.001mA
- Sensor open / broken wire indication
- Configurable individual alarms indication
- Retentive alarm counters on power cycle
- Individual channel offset and gain calibration
- Integer and IEEE754 float value support
- Modbus RTU over Isolated RS-485
- Modbus RTU remote write master mode
- Easy to use free ModViz software
- Rotary address switch for address selection from 1 to 99
- Wide Supported baud rates from 300 to 115200
- DIN rail mountable
- Dimensions: 110mm × 50mm × 55mm
Isolated Analog Signal Converter 300V to 10V
Features:-
2 Way isolation up to 1KVrms
Compact design suitable for both DIN Rail and wall
mount
1 Year Warranty against any manufacturing defects.
Customizable Input voltages available on order
Input Signal type : 0-300V DC
Output Signal type : 0-10V DC
Accuracy : Less than +/- 1% @ 25°C ambient temperature
Input Supply Voltage : 24V DC
Isolated Analog Signal Converter 70V to 10V
Features:-
2 Way isolation up to 1KVrms
Compact design suitable for both DIN Rail and wall
mount
1 Year Warranty against any manufacturing defects.
Customizable Input voltages available on order
Input Signal type : 0-70V DC
Output Signal type : 0-10V DC
Accuracy : Less than +/- 1% @ 25°C ambient temperature
Input Supply Voltage : 24V DC
UIO- 4AI 4DI 4RO Modbus Module
- Four Channel 0 ~ 20mA 16 bit Resolution ADC
- 4 digital inputs and 4 relay outputs with LED indication for all IO’s
- RS485 interface output with Modbus RTU Slave
- Suitable for all types of Industrial Machine Automation, IoT, IO Expansion, Remote monitoring
- Convenient address selection rotatory switch from 1 – 99 Address
- Complete range of baud rate settings supported
- Suitable for both Din Rail and Wall Mountable
Product Dimensions 110mm x 50mm x 55mm (L x W x H)
Reviews
There are no reviews yet.