Ethernet to RS485 Converter UC-ETH-RS485
Original price was: ₹7,500.00.₹5,000.00Current price is: ₹5,000.00.
Features
- Works with all type of industrial equipments
– PC, PLC, SCADA, HMI, AC/DC Drives, Genset, UPS, Development Kits, etc.
RS485 Rx and Tx light indications for easy visibility and troubleshooting
RJ45 Status light indications, RJ45 built-in 2KV isolation
Easy to use web page configuration option
Unique MAC address
Compact design suitable for both DIN Rail and Wall mount
Support 10/100M, TCP Server, TCP Client, UDP, Httpd Client, Web socket
Supports Transparent Mode data transmission
Supports Modbus TCP to Modbus RTU protocol conversion
ESD and Surge protection for Ethernet, RS485 and Power
Supports all Baud Rates from 300 to 250 kBaud.– varies on cable length
Supports up-to 256 receivers on the bus
– also depends on the other devices connected in the RS485 network
- ESD protection for RS485 pins
– ±15-kV Human-Body Model (HBM)
– ±8-kV IEC1000-4-2, Contact Discharge
– ±15-kV IEC1000-4-2, Air-Gap Discharge
- 1 Year Warranty against any manufacturing defects
5 in stock
Application:-
Features
- Works with all type of industrial equipments
– PC, PLC, SCADA, HMI, AC/DC Drives, Genset, UPS, Development Kits, etc.
RS485 Rx and Tx light indications for easy visibility and troubleshooting
RJ45 Status light indications, RJ45 built-in 2KV isolation
Easy to use web page configuration option
Unique MAC address
Compact design suitable for both DIN Rail and Wall mount
Dimension in mm – 110 x 74 x 35
Support 10/100M, TCP Server, TCP Client, UDP, Httpd Client, Web socket
Supports Transparent Mode data transmission
Supports Modbus TCP to Modbus RTU protocol conversion
ESD and Surge protection for Ethernet, RS485 and Power
Supports all Baud Rates from 300 to 250 kBaud.
– varies on cable length
- Supports up-to 256 receivers on the bus
– also depends on the other devices connected in the RS485 network
- ESD protection for RS485 pins
– ±15-kV Human-Body Model (HBM)
– ±8-kV IEC1000-4-2, Contact Discharge
– ±15-kV IEC1000-4-2, Air-Gap Discharge
12~24V DC Supply
1 Year Warranty against any manufacturing defects
| Part No | UC-ETH-RS485 |
|---|---|
| Brand | Veawe |
| Bus Interface Type | Ethernet to RS485 |
| Channels | 1 Channel |
| Network Speed | 10/100 Mbps |
| Protocol | Modbus TCP, Modbus RTU, TCP/UDP Transparent |
| Baud Rate | 600 ~ 115200 bps |
| Port Type | RJ45, Screw Terminal |
| Supply Voltage | 24V DC (9V ~ 24V DC) |
| Isolation | 2 kV Magnetic Isolation (RJ45) |
| Protection | ESD Protection (±15kV), TVS Surge Clamping, Reverse Polarity |
| Mounting Type | DIN Rail, Wall Mount |
| Dimensions | 110mm x 74mm x 35mm |
| Warranty | 1 Year |
| Country of Origin | Made in India |
You may also like…
Ethernet Surge Protection Device SPD-ETH-RJ45
Ethernet SPD – Surge Protection Device
Protect your Ethernet network equipment from sudden voltage surges and transient overvoltage with our reliable Ethernet Surge Protection Device.
Designed for Ethernet communication lines, it helps safeguard network switches, routers, IP cameras, access points, and other connected equipment.
Key Features:
- High-speed Ethernet surge protection
- Protects against lightning-induced surges and transient voltage
- Compatible with Ethernet and PoE network applications
- Compact and easy-to-install design
- Helps reduce equipment damage and network downtime
- Suitable for CCTV, IP cameras, LAN networks, PoE switches, and communication systems
- Durable construction for reliable long-term operation
- Ideal for indoor and outdoor network installations
Applications:
LAN networks, IP CCTV cameras, network switches, routers, wireless access points, telecom and data communication equipment.
Product Benefit:
The Ethernet SPD provides an additional layer of protection for sensitive network equipment, helping maintain stable communication and extending equipment service life.
Features:-
Protection provided by high energy MOV and TVS
Replaceable modular design, DIN Rail compatible base
Application:-
All types PLC, HMI, IP Cameras, Outdoor ethernet
cabling, etc.,
Where to Use:
Noisy industrial lines like DC inductive load switching
Industrial power panels
Ethernet to Dual RS485 Converter UC-ETH-RS485-D
Features
- Works with all type of industrial equipments
– PC, PLC, SCADA, HMI, AC/DC Drives, Genset, UPS, Development Kits, etc.
RS485 Rx and Tx light indications for easy visibility and troubleshooting
RJ45 Status light indications, RJ45 built-in 2KV isolation
Easy to use web page configuration option* Dimension in mm – 110 x 74 x 35
Support 10/100M, TCP Server, TCP Client, UDP, Httpd Client, Web socket
Supports Transparent Mode data transmission
Supports Modbus TCP to Modbus RTU protocol conversion
ESD and Surge protection for Ethernet, RS485 and Power
Supports all Baud Rates from 300 to 250 kBaud.
– varies on cable length
- Supports up-to 256 receivers on the bus
– also depends on the other devices connected in the RS485 network
- ESD protection for RS485 pins
– ±15-kV Human-Body Model (HBM)
– ±8-kV IEC1000-4-2, Contact Discharge
– ±15-kV IEC1000-4-2, Air-Gap Discharge
12~24V DC Supply
1 Year Warranty against any manufacturing defects
Unique MAC address
Compact design suitable for both DIN Rail and Wall mount
Surge Protection Device RS485 SPD-RS485
Three-stage SPD485 surge protection device meets standard protection against power surges, voltage surges,
common mode line noise and disturbances with three stages of protection and filter each supported with Transient
Voltage Suppressor (TVS).
Housed in a din rail panel mount case with a protected earth ground.
In order to work properly, it is important to have a good connection in E terminal to solid earth ground.
USB to RS485 Converter UC-RS485
*Connecting to Industrial Field buses, remote devices to a latest Computer becomes
difficult due to obsolete of the RS232C ports by Computer Manufactures.
*But with the vast use of equipments with these interfaces needs a connection with PC for monitoring, configuring and working.
*Most of the market available converters are not equipments with proper ESD protection circuits to work longer and with an industry equipment.
*So we have our most suitable converter for both Industrial environment and general usage.
In most case of Windows 10/11 and Linux the driver will be installed automatically when the PC is connected to the Internet.
https://ftdichip.com/wp-content/uploads/2023/09/CDM-v2.12.36.4-WHQL-Certified.zip
Related products
Current Source Simulator Without Display
The Analog Source Generator(0-20mA) will assist
maintenance personnel and integrators in analog input testing
troubleshooting and application development.
This device is handy for testing Sensor data with PLC’s
analog input variants like gas/liquid sensor. Also useful for
measuring data from Pressure sensor, Strain Gauge Sensor,
Temperature Sensor, Level Sensor, Position Sensor etc.
Isolated Analog Signal Converter 150V to 10V
Features:-
2 Way isolation up to 1KVrms
Compact design suitable for both DIN Rail and wall
mount
1 Year Warranty against any manufacturing defects.
Customizable Input voltages available on order
Input Signal type : 0-150V DC
Output Signal type : 0-10V DC
Accuracy : Less than +/- 1% @ 25°C ambient temperature
Input Supply Voltage : 24V DC
Isolated Analog Signal Converter 70V to 20mA
Features:-
2 Way isolation up to 1KVrms
Compact design suitable for both DIN Rail and wall
mount
1 Year Warranty against any manufacturing defects.
Customizable Input voltages available on order
Input Signal type : 0-70V DC
Output Signal type : 4-20mA DC
Accuracy : Less than +/- 1% @ 25°C ambient temperature
Input Supply Voltage : 24V DC
Isolated RS232 To RS232 Repeater
Features and Specification
   * Isolated RS485 Signals up to 2.5KVrms
   * Isolated RS485 Power up to 1KVrms.
   * Supports Auto-Direction Control. No flow
       control signal required.
     – actual baud rate varies on the cable length
– also depends on the other devices connected
       in the RS485 network
   * Works with all type of industrial equipment
     – PC, PLC, SCADA, HMI, AC/DC Drives,
      Genset, UPS, Development Kits, etc.
   * RS485 Rx and Tx light indications for easy
      visibility and troubleshooting
   * ESD protection for both RS485 pins
– ±15-kV Human-Body Model (HBM)
– ±8-kV IEC1000-4-2, Contact Discharge
– ±15-kV IEC1000-4-2, Air-Gap Discharge
   * Compact design suitable for both DIN Rail and Wall mount
   * Dimension in mm – 110 x 74 x 35
   * 1 Year Warranty against any manufacturing
       defects
Isolated RS485 To RS485
Features and Specification
   * Isolated RS485 Signals up to 2.5KVrms
   * Isolated RS485 Power up to 1KVrms.
   * Supports Auto-Direction Control. No flow
       control signal required.
     – actual baud rate varies on the cable length
– also depends on the other devices connected
       in the RS485 network
   * Works with all type of industrial equipment
     – PC, PLC, SCADA, HMI, AC/DC Drives,
      Genset, UPS, Development Kits, etc.
   * RS485 Rx and Tx light indications for easy
      visibility and troubleshooting
   * ESD protection for both RS485 pins
– ±15-kV Human-Body Model (HBM)
– ±8-kV IEC1000-4-2, Contact Discharge
– ±15-kV IEC1000-4-2, Air-Gap Discharge
   * Compact design suitable for both DIN Rail and Wall mount
   * Dimension in mm – 110 x 74 x 35
   * 1 Year Warranty against any manufacturing
       defects
Signal Isolator 4 20ma
Features:-
2 Way isolation up to 1KVrms
Compact design suitable for both DIN Rail and wall
mount
1 Year Warranty against any manufacturing defects.
Customizable Input voltages available on order
Input Signal type : 4-20mA DC
Output Signal type : 4-20mA DC
Accuracy : Less than +/- 1% @ 25°C ambient temperature
Input Supply Voltage : 24V DC
Reviews
There are no reviews yet.