Modbus Temperature Transmitter – MIO-DES1
Original price was: ₹3,500.00.₹2,500.00Current price is: ₹2,500.00.
-
● Multiple Digital Sensors support
● Modbus RS-485 Protocol Interface.
● Convenient address selection dip switch from 1 – 15 Address
● Complete range of baud rate settings supported
● Sensor open indication, Analog values in integer and float values
● Product Dimensions 60mm x 50mm x 20mm (L x W x H)
Supports Sensor Types
DS18B20 – Digital temperature sensor upto 4 channels
SHT40 – Digital temperature and humidity sensor
| Material |
Wood |
|---|---|
| Height |
79.5 cm |
| Length |
46.5 cm |
You may also like…
Ethernet to RS485 Converter UC-ETH-RS485
Features * Works with all type of industrial equipments – PC, PLC, SCADA, HMI, AC/DC Drives, Genset, UPS, Development Kits, etc. * RS485 Rx and Tx light indications for easy visibility and troubleshooting * RJ45 Status light indications, RJ45 built-in 2KV isolation * User Friendly Configuration Software * Easy to use web page configuration option * Unique MAC address * Compact design suitable for both DIN Rail and Wall mount * Support 10/100M, TCP Server, TCP Client, UDP, Httpd Client, Web socket * Supports Transparent Mode data transmission * Supports Modbus TCP to Modbus RTU protocol conversion * ESD and Surge protection for Ethernet, RS485 and Power * Supports all Baud Rates from 300 to 250 kBaud.– varies on cable length * Supports up-to 256 receivers on the bus – also depends on the other devices connected in the RS485 network * ESD protection for RS485 pins – ±15-kV Human-Body Model (HBM) – ±8-kV IEC1000-4-2, Contact Discharge – ±15-kV IEC1000-4-2, Air-Gap Discharge * 1 Year Warranty against any manufacturing defects
Surge Protection Device RS485 SPD-RS485
Three-stage SPD485 surge protection device meets standard protection against power surges, voltage surges, common mode line noise and disturbances with three stages of protection and filter each supported with Transient Voltage Suppressor (TVS). Housed in a din rail panel mount case with a protected earth ground. In order to work properly, it is important to have a good connection in E terminal to solid earth ground.
USB to RS485 Converter UC-RS485
*Connecting to Industrial Field buses, remote devices to a latest Computer becomes difficult due to obsolete of the RS232C ports by Computer Manufactures.
*But with the vast use of equipments with these interfaces needs a connection with PC for monitoring, configuring and working.
*Most of the market available converters are not equipments with proper ESD protection circuits to work longer and with an industry equipment.
*So we have our most suitable converter for both Industrial environment and general usage.
In most case of Windows 10/11 and Linux the driver will be installed automatically when the PC is connected to the Internet. https://ftdichip.com/wp-content/uploads/2023/09/CDM-v2.12.36.4-WHQL-Certified.zip
Reviews
There are no reviews yet.