temperature humidity sensors to Modbus RTU RS485
Original price was: ₹3,500.00.₹2,700.00Current price is: ₹2,700.00.
The MIO-DES1 Modbus IO Module is a compact digital environmental sensor interface designed for industrial monitoring and automation.
It supports DS18B20 and SHT40 sensors with Modbus RS-485 communication, providing temperature and humidity data.
Multiple Digital Sensors support
Modbus RS-485 Protocol Interface.
Convenient address selection dip switch from 1 – 15 Address
Complete range of baud rate settings supported
Sensor open indication, Analog values in integer and float values
Product Dimensions 60mm x 50mm x 20mm (L x W x H)
The MIO-DES1 Modbus IO Module is a compact digital environmental sensor interface designed for industrial monitoring and automation.
It supports DS18B20 and SHT40 sensors with Modbus RS-485 communication, providing temperature and humidity data.
Up to four DS18B20 sensors or one SHT40 senor can be connected with wide baud rate support
Four DS18B20 Temperature sensor or one SHT40 Humidity and Temperature sensor
Modbus RTU over RS-485
Dip address switch for address selection from 1 to 15
Wide Supported baud rates from 300 to 115200
Dimensions: 60mm x 50mm x 20mm (L x W x H)
Configuration Software
| Brand | Veawe |
|---|---|
| Mounting Type | DIN Rail, Wall Mount |
| Bus Interface Type | RS485 |
| Supply Voltage | 24V DC, 5V – USB Powered |
| Warranty | 1 Year |
| Part No | MIO-DES1 |
| Dimensions | 60mm x 50mm x 20mm |
| Country of Origin | Made in India |
You may also like…
Ethernet to RS485 Converter UC-ETH-RS485
Features
- Works with all type of industrial equipments
– PC, PLC, SCADA, HMI, AC/DC Drives, Genset, UPS, Development Kits, etc.
RS485 Rx and Tx light indications for easy visibility and troubleshooting
RJ45 Status light indications, RJ45 built-in 2KV isolation
Easy to use web page configuration option
Unique MAC address
Compact design suitable for both DIN Rail and Wall mount
Support 10/100M, TCP Server, TCP Client, UDP, Httpd Client, Web socket
Supports Transparent Mode data transmission
Supports Modbus TCP to Modbus RTU protocol conversion
ESD and Surge protection for Ethernet, RS485 and Power
Supports all Baud Rates from 300 to 250 kBaud.– varies on cable length
Supports up-to 256 receivers on the bus
– also depends on the other devices connected in the RS485 network
- ESD protection for RS485 pins
– ±15-kV Human-Body Model (HBM)
– ±8-kV IEC1000-4-2, Contact Discharge
– ±15-kV IEC1000-4-2, Air-Gap Discharge
- 1 Year Warranty against any manufacturing defects
Surge Protection Device RS485 SPD-RS485
Three-stage SPD485 surge protection device meets standard protection against power surges, voltage surges,
common mode line noise and disturbances with three stages of protection and filter each supported with Transient
Voltage Suppressor (TVS).
Housed in a din rail panel mount case with a protected earth ground.
In order to work properly, it is important to have a good connection in E terminal to solid earth ground.
USB to RS485 Converter UC-RS485
*Connecting to Industrial Field buses, remote devices to a latest Computer becomes
difficult due to obsolete of the RS232C ports by Computer Manufactures.
*But with the vast use of equipments with these interfaces needs a connection with PC for monitoring, configuring and working.
*Most of the market available converters are not equipments with proper ESD protection circuits to work longer and with an industry equipment.
*So we have our most suitable converter for both Industrial environment and general usage.
In most case of Windows 10/11 and Linux the driver will be installed automatically when the PC is connected to the Internet.
https://ftdichip.com/wp-content/uploads/2023/09/CDM-v2.12.36.4-WHQL-Certified.zip
Related products
Isolated Analog Signal Converter 150V to 10V
Features:-
2 Way isolation up to 1KVrms
Compact design suitable for both DIN Rail and wall
mount
1 Year Warranty against any manufacturing defects.
Customizable Input voltages available on order
Input Signal type : 0-150V DC
Output Signal type : 0-10V DC
Accuracy : Less than +/- 1% @ 25°C ambient temperature
Input Supply Voltage : 24V DC
Isolated Analog Signal Converter 70V to 10V
Features:-
2 Way isolation up to 1KVrms
Compact design suitable for both DIN Rail and wall
mount
1 Year Warranty against any manufacturing defects.
Customizable Input voltages available on order
Input Signal type : 0-70V DC
Output Signal type : 0-10V DC
Accuracy : Less than +/- 1% @ 25°C ambient temperature
Input Supply Voltage : 24V DC
Isolated RS232 To RS485
Isolated RS485 Signals up to 2.5Vrms
Isolated RS485 Power up to 1KVrms.
Supports Auto-Direction Control. No flow
control signal required.
- Supports all Baud Rates from 300 to 250
kBaud.
– actual baud rate varies on the cable length
– also depends on the other devices
connected in the RS485 network
- Works with all type of industrial equipments
– PC, PLC, SCADA, HMI, AC/DC Drives,
Genset, UPS, Development Kits, etc.
- RS485 Rx and Tx light indications for easy
visibility and troubleshooting
- ESD protection for RS232 and RS485 pins
– ±15-kV Human-Body Model (HBM)
– ±8-kV IEC1000-4-2, Contact Discharge
– ±15-kV IEC1000-4-2, Air-Gap Discharge
- Compact design suitable for both DIN Rail and
Wall mount
Dimension in mm – 110 x 74 x 35
1 Year Warranty against any manufacturing
defects
Isolated RS485 To RS485
Features and Specification
* Isolated RS485 Signals up to 2.5KVrms
* Isolated RS485 Power up to 1KVrms.
* Supports Auto-Direction Control. No flow
control signal required.
– actual baud rate varies on the cable length
– also depends on the other devices connected
in the RS485 network
* Works with all type of industrial equipment
– PC, PLC, SCADA, HMI, AC/DC Drives,
Genset, UPS, Development Kits, etc.
* RS485 Rx and Tx light indications for easy
visibility and troubleshooting
* ESD protection for both RS485 pins
– ±15-kV Human-Body Model (HBM)
– ±8-kV IEC1000-4-2, Contact Discharge
– ±15-kV IEC1000-4-2, Air-Gap Discharge
* Compact design suitable for both DIN Rail and Wall mount
* Dimension in mm – 110 x 74 x 35
* 1 Year Warranty against any manufacturing
defects
Loadcell to Modbus Transmitter
- One Load Cell / Strain Gauge input to Modbus RTU
- Two modes of operation – Scale Mode and Force Mode
- 20-bit resolution analog to digital precision conditioner
- Clean analog front-end designed for industrial environments
- Free software based easy configuration
- Integer and IEEE754 float value support
- Modbus RTU over RS-485
- DIP switch for address selection from 1 to 15
- Wide Supported baud rates from 300 to 115200
- DIN Rail mount support
- Dimensions: 60mm x 50mm x 20mm (L x W x H)
Reviews
There are no reviews yet.