2 Channel Digital Output Modbus RTU RS485 Module
Original price was: ₹3,500.00.₹1,650.00Current price is: ₹1,650.00.
• 2 Isolated Digital SSR Outputs, 0~60V DC, 1.0 Amp
• 1 High speed Output with Variable Frequency and Duty
• Modbus RTU over RS-485
• Dip address switch for address selection from 1 to 15
• Wide Supported baud rates from 300 to 115200
• DIN Rail mount support
• Dimensions: 60mm x 50mm x 20mm (L x W x H)
2 Channel Digital Output Modbus RTU RS485 Module
2 Isolated Digital Inputs, 5~24V compatible
2 High speed Production counter and RPM measurement
All Inputs has latched status, Never miss an input change
All Inputs has individual counter functions
Modbus RTU over RS-485
Dip address switch for address selection from 1 to 15
Wide Supported baud rates from 300 to 115200
Dimensions: 60mm x 50mm x 20mm (L x W x H)
Compact Modbus RTU remote I/O module with two isolated digital outputs and PWM support.
| Material | Wood |
|---|---|
| Height | 79.5 cm |
| Length | 46.5 cm |
You may also like…
Ethernet to RS485 Converter UC-ETH-RS485
Features
* Works with all type of industrial equipments
– PC, PLC, SCADA, HMI, AC/DC Drives, Genset, UPS, Development Kits, etc.
* RS485 Rx and Tx light indications for easy visibility and troubleshooting
* RJ45 Status light indications, RJ45 built-in 2KV isolation
* User Friendly Configuration Software
* Easy to use web page configuration option
* Unique MAC address
* Compact design suitable for both DIN Rail and Wall mount
* Support 10/100M, TCP Server, TCP Client, UDP, Httpd Client, Web socket
* Supports Transparent Mode data transmission
* Supports Modbus TCP to Modbus RTU protocol conversion
* ESD and Surge protection for Ethernet, RS485 and Power
* Supports all Baud Rates from 300 to 250 kBaud.– varies on cable length
* Supports up-to 256 receivers on the bus
– also depends on the other devices connected in the RS485 network
* ESD protection for RS485 pins
– ±15-kV Human-Body Model (HBM)
– ±8-kV IEC1000-4-2, Contact Discharge
– ±15-kV IEC1000-4-2, Air-Gap Discharge
* 1 Year Warranty against any manufacturing defects
Surge Protection Device RS485 SPD-RS485
Three-stage SPD485 surge protection device meets standard protection against power surges, voltage surges,
common mode line noise and disturbances with three stages of protection and filter each supported with Transient
Voltage Suppressor (TVS).
Housed in a din rail panel mount case with a protected earth ground.
In order to work properly, it is important to have a good connection in E terminal to solid earth ground.
USB to RS485 Converter UC-RS485
*Connecting to Industrial Field buses, remote devices to a latest Computer becomes
difficult due to obsolete of the RS232C ports by Computer Manufactures.
*But with the vast use of equipments with these interfaces needs a connection with PC for monitoring, configuring and working.
*Most of the market available converters are not equipments with proper ESD protection circuits to work longer and with an industry equipment.
*So we have our most suitable converter for both Industrial environment and general usage.
In most case of Windows 10/11 and Linux the driver will be installed automatically when the PC is connected to the Internet.
https://ftdichip.com/wp-content/uploads/2023/09/CDM-v2.12.36.4-WHQL-Certified.zip
Related products
2 Channel Analog Input Modbus RTU RS485 Module
- One 0 – 20mA and one 0 – 36V DC Analog Inputs
- 16-bit analog resolution
- Modbus RS-485 Protocol Interface.
- Integer and IEEE754 float value support
- Offset and Gain support
- Convenient address selection dip switch from 1 – 15 Address
- Complete range of baud rate settings supported
- Sensor open indication, Analog values in integer and float values
- DIN Rail mount support
- Product Dimensions 60mm x 50mm x 20mm (L x W x H)
4 Input Output Modbus Module UIO-4DI4DO
- 4 digital inputs and 4 digital outputs with LED indication for all IO’s
- RS485 interface output with Modbus RTU Slave
- Suitable for all types of Industrial Machine Automation, IoT, IO Expansion, Remote monitoring
- ● Convenient address selection rotatory switch from 1 – 99 Address
- ● Complete range of baud rate settings supported
- ● Suitable for both Din Rail and Wall Mountable
● Product Dimensions 110mm x 50mm x 55mm (L x W x H)
8 Channel 20mA Modbus Input Module UIO-8IN-20mA
Key Features
- 8 Channel 0–20mA Analog Inputs
- 16-bit analog resolution
- Factory calibrated accuracy: ± 0.1% from upper-range
- Raw analog value resolution in steps of 0.001mA
- Sensor open / broken wire indication
- Configurable individual alarms indication
- Retentive alarm counters on power cycle
- Individual channel offset and gain calibration
- Integer and IEEE754 float value support
- Modbus RTU over Isolated RS-485
- Modbus RTU remote write master mode
- Easy to use free ModViz software
- Rotary address switch for address selection from 1 to 99
- Wide Supported baud rates from 300 to 115200
- DIN rail mountable
- Dimensions: 110mm × 50mm × 55mm
Reviews
There are no reviews yet.