Sale
2 Channel Analog Input Modbus RTU RS485 Module
- One 0 – 20mA and one 0 – 36V DC Analog Inputs
- 16-bit analog resolution
- Modbus RS-485 Protocol Interface.
- Integer and IEEE754 float value support
- Offset and Gain support
- Convenient address selection dip switch from 1 – 15 Address
- Complete range of baud rate settings supported
- Sensor open indication, Analog values in integer and float values
- DIN Rail mount support
- Product Dimensions 60mm x 50mm x 20mm (L x W x H)
Sale
4 Channel 10v Modbus UIO-4IN-10v
Default mode is handy when the serial communication setting are forgotten. Setting the Address switch to 00 will put the device in default mode Address Set to 00 – Default mode ON – Slave Address – 1, Baud 19200, 8N1 Address Set to non 00 – Default mode OFF
– As per the saved configuration values.
Sale
4 Channel 20mA Modbus UIO-4IN-20mA
Default mode is handy when the serial communication setting are forgotten. Setting the Address switch to 00 will put the device in default mode Address Set to 00 – Default mode ON – Slave Address – 1, Baud 19200, 8N1 Address Set to non 00 – Default mode OFF
– As per the saved configuration values.
Sale
8 Channel 20mA Modbus Input Module UIO-8IN-20mA
-
Key Features
- 8 Channel 0–20mA Analog Inputs
- 16-bit analog resolution
- Factory calibrated accuracy: ± 0.1% from upper-range
- Raw analog value resolution in steps of 0.001mA
- Sensor open / broken wire indication
- Configurable individual alarms indication
- Retentive alarm counters on power cycle
- Individual channel offset and gain calibration
- Integer and IEEE754 float value support
- Modbus RTU over Isolated RS-485
- Modbus RTU remote write master mode
- Easy to use free ModViz software
- Rotary address switch for address selection from 1 to 99
- Wide Supported baud rates from 300 to 115200
- DIN rail mountable
- Dimensions: 110mm × 50mm × 55mm
Sale
8 Channel 4x 20mA + 4x 10V Modbus Input Module UIO-8IN-VI
Key Features
- 4 Channel 0–20mA Analog Inputs (CH1–CH4)
- 4 Channel 0–10V Analog Inputs (CH5–CH8)
- 16-bit analog resolution
- Factory calibrated accuracy: ± 0.1% from upper-range
- Raw analog value resolution in steps of 0.001mA (CH1–CH4) & 0.001V (CH5–CH8)
- Sensor open / broken wire indication
- Configurable individual alarms indication
- Retentive alarm counters on power cycle
- Individual channel offset and gain calibration
- Integer and IEEE754 float value support
- Modbus RTU over Isolated RS-485
- Modbus RTU remote write master mode
- Easy to use free ModViz software
- Rotary address switch for address selection from 1 to 99
- Wide Supported baud rates from 300 to 115200
- DIN rail mountable
- Dimensions: 110mm × 50mm × 55mm
Sale
UIO- 4AI 4DI 4RO Modbus Module
- Four Channel 0 ~ 20mA 16 bit Resolution ADC
- 4 digital inputs and 4 relay outputs with LED indication for all IO’s
- RS485 interface output with Modbus RTU Slave
- Suitable for all types of Industrial Machine Automation, IoT, IO Expansion, Remote monitoring
- Convenient address selection rotatory switch from 1 – 99 Address
- Complete range of baud rate settings supported
- Suitable for both Din Rail and Wall Mountable
Product Dimensions 110mm x 50mm x 55mm (L x W x H)