Industrial Isolated USB Repeater UC-ISO-USB-24V
- 5 kV RMS Galvanic Isolation: Complete optical and galvanic protection shielding host PCs and PLCs from high-voltage field transients and ground loops.
- 1,500 Vrms Working Voltage: Industrial working voltage barrier between host and downstream peripheral equipment.
- External 24V DC Industrial Power: Downstream circuit and peripheral powered by a rugged 12–28V DC industrial field supply (provides clean 5V DC @ 500mA to USB device).
- USB Type-C Host & Type-A Device Ports: Modern, reversible Type-C connection to PC host and robust Type-A receptacle for industrial peripherals.
- Full & Low Speed USB Auto-Switching: Compatible with USB 2.0 Full Speed (12 Mbps) and Low Speed (1.5 Mbps) industrial devices without jumper configuration.
- Comprehensive Surge & ESD Protection: Built-in 600W TVS clamping, ±15 kV ESD (IEC 61000-4-2), and 12A lightning surge suppression (IEC 61000-4-5).
- Dual LED Power Diagnostics: Dedicated power indicator LEDs for both Host and Device domains for instant troubleshooting.
- Compact DIN Rail Mounting: Enclosed in a compact 60 mm x 50 mm x 20 mm industrial housing with an integrated 35 mm DIN rail clip.
Isolated RS232 To RS232 Repeater
Features and Specification
* Isolated RS485 Signals up to 2.5KVrms
* Isolated RS485 Power up to 1KVrms.
* Supports Auto-Direction Control. No flow
control signal required.
– actual baud rate varies on the cable length
– also depends on the other devices connected
in the RS485 network
* Works with all type of industrial equipment
– PC, PLC, SCADA, HMI, AC/DC Drives,
Genset, UPS, Development Kits, etc.
* RS485 Rx and Tx light indications for easy
visibility and troubleshooting
* ESD protection for both RS485 pins
– ±15-kV Human-Body Model (HBM)
– ±8-kV IEC1000-4-2, Contact Discharge
– ±15-kV IEC1000-4-2, Air-Gap Discharge
* Compact design suitable for both DIN Rail and Wall mount
* Dimension in mm – 110 x 74 x 35
* 1 Year Warranty against any manufacturing
defects
Isolated RS485 To RS485
Features and Specification
* Isolated RS485 Signals up to 2.5KVrms
* Isolated RS485 Power up to 1KVrms.
* Supports Auto-Direction Control. No flow
control signal required.
– actual baud rate varies on the cable length
– also depends on the other devices connected
in the RS485 network
* Works with all type of industrial equipment
– PC, PLC, SCADA, HMI, AC/DC Drives,
Genset, UPS, Development Kits, etc.
* RS485 Rx and Tx light indications for easy
visibility and troubleshooting
* ESD protection for both RS485 pins
– ±15-kV Human-Body Model (HBM)
– ±8-kV IEC1000-4-2, Contact Discharge
– ±15-kV IEC1000-4-2, Air-Gap Discharge
* Compact design suitable for both DIN Rail and Wall mount
* Dimension in mm – 110 x 74 x 35
* 1 Year Warranty against any manufacturing
defects
RS485 to RS485 Repeater UC-RS485-RS485
Connecting to Industrial Field buses, remote devices to a latest Computer becomes
difficult due to obsolete of the RS232C ports by Computer Manufactures. But with the vast
use of equipments with these interfaces needs a connection with PC for monitoring,
configuring and working. Most of the market available converters are not equipments with
proper ESD protection circuits to work longer and with an industry equipment. So we have our
most suitable converter for both Industrial environment and general usage.
Supports Auto-Direction Control.
- Supports all Baud Rates from 300 to 250 kBaud.
– actual baud rate varies on the cable length
- Supports up-to 256 receivers on the bus
– also depends on the other devices connected in
the RS485 network
- Works with all type of industrial equipments
– PC, PLC, SCADA, HMI, AC/DC Drives,
Genset, UPS, Development Kits, etc.
- RS485 Rx and Tx light indications for easy visibility
and troubleshooting
- ESD protection for and RS485 pins at both ends