4-20mA Surge Protection Device SPD 4 to 20mA
Original price was: ₹1,000.00.₹600.00Current price is: ₹600.00.
- Three-stage SPD-20mA surge protection device meets standard
protection against power surges, voltage surges and
disturbances with three stages of protection.
- Housed in a din rail panel mount case with a protected earth
ground.
- In order to work properly, it is important to have a good
connection in E terminal to solid earth ground.
- Unknown electronic device failure and misbehave in controller
units might be avoided by using SPD-20mA
Features:
Protection provided by high energy MOV and TVS
Replaceable modular design, DIN Rail compatible base
All types of 20mA current loop devices, Also works for HART
interface
Where to Use:
*Noisy industrial lines like DC inductive load switching
*Industrial power panels
*Solar plants
*Gas stations
Applications:
* Three-stage SPD-20mA surge protection device meets standard
protection against power surges, voltage surges and
disturbances with three stages of protection.
* Housed in a din rail panel mount case with a protected earth
ground.
* In order to work properly, it is important to have a good
connection in E terminal to solid earth ground.
* Unknown electronic device failure and misbehave in controller
units might be avoided by using SPD-20mA
Features:
* Protection provided by high energy MOV and TVS
* Replaceable modular design, DIN Rail compatible base
* All types of 20mA current loop devices, Also works for HART
interface
Where to Use:
Noisy industrial lines like DC inductive load switching
Industrial power panels
Solar plants
Gas stations
| Part No | SPD-20MA |
|---|---|
| Brand | Veawe |
| Mounting Type | DIN Rail |
| Warranty | 1 Year |
| Country of Origin | Made in India |
You may also like…
Current Source Simulator 0/4 to 20mA
The Analog Source Generator(0-20mA) will assist
maintenance personnel and integrators in analog input testing
troubleshooting and application development.
This device is handy for testing Sensor data with PLC’s
analog input variants like gas/liquid sensor. Also useful for
measuring data from Pressure sensor, Strain Gauge Sensor,
Temperature Sensor, Level Sensor, Position Sensor etc.
Signal Isolator 4 20ma
Features:-
2 Way isolation up to 1KVrms
Compact design suitable for both DIN Rail and wall
mount
1 Year Warranty against any manufacturing defects.
Customizable Input voltages available on order
Input Signal type : 4-20mA DC
Output Signal type : 4-20mA DC
Accuracy : Less than +/- 1% @ 25°C ambient temperature
Input Supply Voltage : 24V DC
Surge Protection Device 24V DC SPD
Three-stage SPD-24V-DC surge protection device meets standard protection against power surges, voltage surges and disturbances with three stages of protection.
Housed in a din rail panel mount case with a protected earth ground.
In order to work properly, it is important to have a good connection in E terminal to solid earth ground. Unknown electronic device failure and misbehave in controller units might be avoided by using SPD-24V-DC
Features:-
Protection provided by high energy MOV and TVS
Internal thermal disconnects
Status indicator input and output
Replaceable modular design, DIN Rail compatible base
Application:–
All types 24V-DC PLC, HMI, etc.,
Where to Use:
Noisy industrial lines like DC inductive load switching
Industrial power panels
Requiring a Load dump feature
open Long DC caballing in panel board
Surge Protection Device RS485 SPD-RS485
Three-stage SPD485 surge protection device meets standard protection against power surges, voltage surges,
common mode line noise and disturbances with three stages of protection and filter each supported with Transient
Voltage Suppressor (TVS).
Housed in a din rail panel mount case with a protected earth ground.
In order to work properly, it is important to have a good connection in E terminal to solid earth ground.
Related products
Ethernet Surge Protection Device SPD-ETH-RJ45
Ethernet SPD – Surge Protection Device
Protect your Ethernet network equipment from sudden voltage surges and transient overvoltage with our reliable Ethernet Surge Protection Device.
Designed for Ethernet communication lines, it helps safeguard network switches, routers, IP cameras, access points, and other connected equipment.
Key Features:
- High-speed Ethernet surge protection
- Protects against lightning-induced surges and transient voltage
- Compatible with Ethernet and PoE network applications
- Compact and easy-to-install design
- Helps reduce equipment damage and network downtime
- Suitable for CCTV, IP cameras, LAN networks, PoE switches, and communication systems
- Durable construction for reliable long-term operation
- Ideal for indoor and outdoor network installations
Applications:
LAN networks, IP CCTV cameras, network switches, routers, wireless access points, telecom and data communication equipment.
Product Benefit:
The Ethernet SPD provides an additional layer of protection for sensitive network equipment, helping maintain stable communication and extending equipment service life.
Features:-
Protection provided by high energy MOV and TVS
Replaceable modular design, DIN Rail compatible base
Application:-
All types PLC, HMI, IP Cameras, Outdoor ethernet
cabling, etc.,
Where to Use:
Noisy industrial lines like DC inductive load switching
Industrial power panels
Isolated Analog Signal Converter 70V to 20mA
Features:-
2 Way isolation up to 1KVrms
Compact design suitable for both DIN Rail and wall
mount
1 Year Warranty against any manufacturing defects.
Customizable Input voltages available on order
Input Signal type : 0-70V DC
Output Signal type : 4-20mA DC
Accuracy : Less than +/- 1% @ 25°C ambient temperature
Input Supply Voltage : 24V DC
Isolated Analog Signal Converter K Type
Features:-
2 Way isolation up to 1KVrms
Compact design suitable for both DIN Rail and wall
mount
1 Year Warranty against any manufacturing defects.
Customizable Input voltages available on order
Input Signal type : K – type
Output Signal type : 0/4 – 20mA
Accuracy : Less than +/- 1% @ 25°C ambient temperature
Input Supply Voltage : 24V DC
Signal Isolator 4 20ma to 10 V
Features:-
2 Way isolation up to 1KVrms
Compact design suitable for both DIN Rail and wall mount
1 Year Warranty against any manufacturing defects.
Customizable Input voltages available on order
Input Signal type : 4-20mA DC
Output Signal type : 0-10V DC
Accuracy : Less than +/- 1% @ 25°C ambient temperature
Input Supply Voltage : 24V DC
UIO- 4AI 4DI 4RO Modbus Module
- Four Channel 0 ~ 20mA 16 bit Resolution ADC
- 4 digital inputs and 4 relay outputs with LED indication for all IO’s
- RS485 interface output with Modbus RTU Slave
- Suitable for all types of Industrial Machine Automation, IoT, IO Expansion, Remote monitoring
- Convenient address selection rotatory switch from 1 – 99 Address
- Complete range of baud rate settings supported
- Suitable for both Din Rail and Wall Mountable
Product Dimensions 110mm x 50mm x 55mm (L x W x H)
Reviews
There are no reviews yet.