Current Source Simulator 0/4 to 20mA
The Analog Source Generator(0-20mA) will assist
maintenance personnel and integrators in analog input testing
troubleshooting and application development.
This device is handy for testing Sensor data with PLC’s
analog input variants like gas/liquid sensor. Also useful for
measuring data from Pressure sensor, Strain Gauge Sensor,
Temperature Sensor, Level Sensor, Position Sensor etc.
Current Source Simulator Without Display
The Analog Source Generator(0-20mA) will assist
maintenance personnel and integrators in analog input testing
troubleshooting and application development.
This device is handy for testing Sensor data with PLC’s
analog input variants like gas/liquid sensor. Also useful for
measuring data from Pressure sensor, Strain Gauge Sensor,
Temperature Sensor, Level Sensor, Position Sensor etc.
Dual Output Current Source Simulator 0 to 20mA
Perfect 3 wire 0-20mA Signal Source Generator – Dual
Output
Power Supply
24V DC External
Current Output
Output Range 0/4-20mA
Output Accuracy ±1% of full scale
Load range 10 Ω ~ 1.1k Ω
Protection
Input Reverse Polarity, Output Short Circuit Protection
DIMENSION
Product size 70 x 50 x 85 mm
Din rail mountable
Variable using 5 turns Potentiometer.
Selectable range 0 mA ~ 20 mA in 0.01mA steps
resolution or more.
0 ~ 20mA or 4 ~ 20mA selection by external jumper.
Current output values are set by rotating the knob.
Industrial Isolated USB Repeater UC-ISO-USB-24V
- 5 kV RMS Galvanic Isolation: Complete optical and galvanic protection shielding host PCs and PLCs from high-voltage field transients and ground loops.
- 1,500 Vrms Working Voltage: Industrial working voltage barrier between host and downstream peripheral equipment.
- External 24V DC Industrial Power: Downstream circuit and peripheral powered by a rugged 12–28V DC industrial field supply (provides clean 5V DC @ 500mA to USB device).
- USB Type-C Host & Type-A Device Ports: Modern, reversible Type-C connection to PC host and robust Type-A receptacle for industrial peripherals.
- Full & Low Speed USB Auto-Switching: Compatible with USB 2.0 Full Speed (12 Mbps) and Low Speed (1.5 Mbps) industrial devices without jumper configuration.
- Comprehensive Surge & ESD Protection: Built-in 600W TVS clamping, ±15 kV ESD (IEC 61000-4-2), and 12A lightning surge suppression (IEC 61000-4-5).
- Dual LED Power Diagnostics: Dedicated power indicator LEDs for both Host and Device domains for instant troubleshooting.
- Compact DIN Rail Mounting: Enclosed in a compact 60 mm x 50 mm x 20 mm industrial housing with an integrated 35 mm DIN rail clip.
Isolated Analog Signal Converter 10V – 10V
Features:-
2 Way isolation up to 1KVrms
Compact design suitable for both DIN Rail and wall
mount
1 Year Warranty against any manufacturing defects.
Customizable Input voltages available on order
Input Signal type : 0-10V DC
Output Signal type : 0-10V DC
Accuracy : Less than +/- 1% @ 25°C ambient temperature
Input Supply Voltage : 24V DC
Surge Protection Device 24V DC SPD
Three-stage SPD-24V-DC surge protection device meets standard protection against power surges, voltage surges and disturbances with three stages of protection.
Housed in a din rail panel mount case with a protected earth ground.
In order to work properly, it is important to have a good connection in E terminal to solid earth ground. Unknown electronic device failure and misbehave in controller units might be avoided by using SPD-24V-DC
Features:-
Protection provided by high energy MOV and TVS
Internal thermal disconnects
Status indicator input and output
Replaceable modular design, DIN Rail compatible base
Application:–
All types 24V-DC PLC, HMI, etc.,
Where to Use:
Noisy industrial lines like DC inductive load switching
Industrial power panels
Requiring a Load dump feature
open Long DC caballing in panel board
Voltage Source Simulator 0-10V (USS10V24V-D)
The Analog Source Generator(0-10v) will assist
maintenance personnel and integrators in analog input testing
troubleshooting and application development.
This device is handy for testing Sensor data with PLC’s
analog input variants like gas/liquid sensor. Also useful for
measuring data from Pressure sensor, Strain Gauge Sensor,
Temperature Sensor, Level Sensor, Position Sensor etc..,
SPECIFICATION
Functionality
Perfect 0-10v Signal Source Generator
Power Supply
24V DC External
Display
4 digit Segment display
Voltage Output
Output Range 0-10V DC
Output Accuracy ±1% of full scale
Load range 100mA Max
Protection
Input Reverse Polarity , Output Short Circuit Protection
DIMENSION
Product size 48x48x90mm.
Preffered Panel cut out 45x45mm.