UIO 12DI 12DO Modbus Module
UIO 24DI 24DO Modbus Module
UIO- 24DI Modbus Module
UIO- 24DO Modbus Module
UIO- 48DI Modbus Module
UIO- 4AI 4DI 4RO Modbus Module
- Four Channel 0 ~ 20mA 16 bit Resolution ADC
- 4 digital inputs and 4 relay outputs with LED indication for all IO’s
- RS485 interface output with Modbus RTU Slave
- Suitable for all types of Industrial Machine Automation, IoT, IO Expansion, Remote monitoring
- Convenient address selection rotatory switch from 1 – 99 Address
- Complete range of baud rate settings supported
- Suitable for both Din Rail and Wall Mountable
Product Dimensions 110mm x 50mm x 55mm (L x W x H)
USB to ISO RS485 Converter UC-ISO-RS485
Specification
Isolated RS485 Power up to 1KVrms
Isolated RS485 Signals up to 2.5KVrms
Extended Common mode voltage between A an B ±25V
Works with all type of industrial equipments
– PC, PLC, SCADA, HMI, AC/DC Drives, Genset, UPS, Development Kits, etc.
USB Power, RS485 Rx and Tx light indications for easy visibility and troubleshooting
ESD and Surge protection for USB, RS485 and Power
Supports all Baud Rates from 300 to 250 kBaud.
– varies on cable length
- Supports up-to 256 receivers on the bus
– also depends on the other devices connected in the RS485 network
Very compact size 60mm x 40mm x 20mm
ESD protection for RS485 pins
– ±16-kV Human-Body Model (HBM)
– ±8-kV IEC1000-4-2, Contact Discharge
– ±15-kV IEC1000-4-2, Air-Gap Discharge
- ESD protection for USB
– ±2-kV Human-Body Model (HBM)
– ±200-kV Machine Mode (MM)
– ±500-kV Charged device mode (CDM)
- 1 Year Warranty against any manufacturing defects
In most case of Windows 10/11 and Linux the driver will be installed automatically when the PC is connected to the Internet.
https://ftdichip.com/wp-content/uploads/2023/09/CDM-v2.12.36.4-WHQL-Certified.zip
Voltage and Current Source Simulator Without Display (USS10V20MA)
Features:-
- Dual Output Signal Simulation: 1 Channel 0–10V DC Voltage Source and 1 Channel 0/4–20mA DC Current Source.
- Independent Dial Controls: Precision analog potentiometers for simultaneous voltage and current signal adjustment.
- Without Display Operation: Rugged, direct analog dial control ideal for fast testing and commissioning without digital menus.
- Jumper-Selectable Current Span: Select between 0–20mA (Jumper Closed) and 4–20mA (Jumper Open).
- Compact Design: Standard 35mm DIN Rail and panel mount enclosure suitable for industrial control cabinets.
- Industrial Protection: Built-in input reverse polarity protection and output short-circuit protection.
- 24V DC Supply: Operates directly from standard industrial 24V DC automation power.
Voltage Source Simulator 0-10V (USS10V24V-D)
The Analog Source Generator(0-10v) will assist
maintenance personnel and integrators in analog input testing
troubleshooting and application development.
This device is handy for testing Sensor data with PLC’s
analog input variants like gas/liquid sensor. Also useful for
measuring data from Pressure sensor, Strain Gauge Sensor,
Temperature Sensor, Level Sensor, Position Sensor etc..,
SPECIFICATION
Functionality
Perfect 0-10v Signal Source Generator
Power Supply
24V DC External
Display
4 digit Segment display
Voltage Output
Output Range 0-10V DC
Output Accuracy ±1% of full scale
Load range 100mA Max
Protection
Input Reverse Polarity , Output Short Circuit Protection
DIMENSION
Product size 48x48x90mm.
Preffered Panel cut out 45x45mm.