2 Channel Digital Output Modbus RTU RS485 Module
Original price was: ₹3,500.00.₹1,650.00Current price is: ₹1,650.00.
2 Isolated Digital SSR Outputs, 0~60V DC, 1.0 Amp
1 High speed Output with Variable Frequency and Duty
Modbus RTU over RS-485
Dip address switch for address selection from 1 to 15
Wide Supported baud rates from 300 to 115200
DIN Rail mount support
Dimensions: 60mm x 50mm x 20mm (L x W x H)
2 Channel Digital Output Modbus RTU RS485 Module
2 Isolated Digital Inputs, 5~24V compatible
2 High speed Production counter and RPM measurement
All Inputs has latched status, Never miss an input change
All Inputs has individual counter functions
Modbus RTU over RS-485
Dip address switch for address selection from 1 to 15
Wide Supported baud rates from 300 to 115200
Dimensions: 60mm x 50mm x 20mm (L x W x H)
Compact Modbus RTU remote I/O module with two isolated digital outputs and PWM support.
Configuration Software
| Brand | Veawe |
|---|---|
| Bus Interface Type | RS485 |
| Channels | 2 channel |
| Country of Origin | Made in India |
| Isolation | Isolated Outputs |
| Mounting Type | DIN Rail |
| Output Isolation Voltage | 2500 Vrms |
| Protection | ESD, Reverse Polarity |
| Protocol | Modbus RTU |
| Supply Voltage | 24V DC, 5V – USB Powered |
| Warranty | 1 Year |
| Controle Type | Digital Controle |
| Part No | MIO-ISO-2DO |
You may also like…
Surge Protection Device RS485 SPD-RS485
Three-stage SPD485 surge protection device meets standard protection against power surges, voltage surges,
common mode line noise and disturbances with three stages of protection and filter each supported with Transient
Voltage Suppressor (TVS).
Housed in a din rail panel mount case with a protected earth ground.
In order to work properly, it is important to have a good connection in E terminal to solid earth ground.
USB to RS485 Converter UC-RS485
*Connecting to Industrial Field buses, remote devices to a latest Computer becomes
difficult due to obsolete of the RS232C ports by Computer Manufactures.
*But with the vast use of equipments with these interfaces needs a connection with PC for monitoring, configuring and working.
*Most of the market available converters are not equipments with proper ESD protection circuits to work longer and with an industry equipment.
*So we have our most suitable converter for both Industrial environment and general usage.
In most case of Windows 10/11 and Linux the driver will be installed automatically when the PC is connected to the Internet.
https://ftdichip.com/wp-content/uploads/2023/09/CDM-v2.12.36.4-WHQL-Certified.zip
Related products
2 Channel Analog Input Modbus RTU RS485 Module
- One 0 – 20mA and one 0 – 36V DC Analog Inputs
- 16-bit analog resolution
- Modbus RS-485 Protocol Interface.
- Integer and IEEE754 float value support
- Offset and Gain support
- Convenient address selection dip switch from 1 – 15 Address
- Complete range of baud rate settings supported
- Sensor open indication, Analog values in integer and float values
- DIN Rail mount support
- Product Dimensions 60mm x 50mm x 20mm (L x W x H)
8 Channel 20mA Modbus Input Module UIO-8IN-20mA
-
Key Features
- 8 Channel 0–20mA Analog Inputs
- 16-bit analog resolution
- Factory calibrated accuracy: ± 0.1% from upper-range
- Raw analog value resolution in steps of 0.001mA
- Sensor open / broken wire indication
- Configurable individual alarms indication
- Retentive alarm counters on power cycle
- Individual channel offset and gain calibration
- Integer and IEEE754 float value support
- Modbus RTU over Isolated RS-485
- Modbus RTU remote write master mode
- Easy to use free ModViz software
- Rotary address switch for address selection from 1 to 99
- Wide Supported baud rates from 300 to 115200
- DIN rail mountable
- Dimensions: 110mm × 50mm × 55mm
Loadcell to Modbus Transmitter
- One Load Cell / Strain Gauge input to Modbus RTU
- Two modes of operation – Scale Mode and Force Mode
- 20-bit resolution analog to digital precision conditioner
- Clean analog front-end designed for industrial environments
- Free software based easy configuration
- Integer and IEEE754 float value support
- Modbus RTU over RS-485
- DIP switch for address selection from 1 to 15
- Wide Supported baud rates from 300 to 115200
- DIN Rail mount support
- Dimensions: 60mm x 50mm x 20mm (L x W x H)
temperature humidity sensors to Modbus RTU RS485
The MIO-DES1 Modbus IO Module is a compact digital environmental sensor interface designed for industrial monitoring and automation.
It supports DS18B20 and SHT40 sensors with Modbus RS-485 communication, providing temperature and humidity data.
Multiple Digital Sensors support
Modbus RS-485 Protocol Interface.
Convenient address selection dip switch from 1 – 15 Address
Complete range of baud rate settings supported
Sensor open indication, Analog values in integer and float values
Product Dimensions 60mm x 50mm x 20mm (L x W x H)
Reviews
There are no reviews yet.