Surge Protection Device 24V DC SPD
Original price was: ₹700.00.₹600.00Current price is: ₹600.00.
Three-stage SPD-24V-DC surge protection device meets standard protection against power surges, voltage surges and disturbances with three stages of protection.
Housed in a din rail panel mount case with a protected earth ground.
In order to work properly, it is important to have a good connection in E terminal to solid earth ground. Unknown electronic device failure and misbehave in controller units might be avoided by using SPD-24V-DC
Features:-
Protection provided by high energy MOV and TVS
Internal thermal disconnects
Status indicator input and output
Replaceable modular design, DIN Rail compatible base
Application:–
All types 24V-DC PLC, HMI, etc.,
Where to Use:
Noisy industrial lines like DC inductive load switching
Industrial power panels
Requiring a Load dump feature
open Long DC caballing in panel board
Application:-
- Three-stage SPD-24V-DC surge protection device meets
standard protection against power surges, voltage surges
and disturbances with three stages of protection.
- Housed in a din rail panel mount case with a protected earth
ground.
*In order to work properly, it is important to have a good
connection in E terminal to solid earth ground.
*Unknown electronic device failure and misbehave in controller units
might be avoided by using SPD-24V-DC
Features:-
Protection provided by high energy MOV and TVS
Internal thermal disconnects
Status indicator input and output
Replaceable modular design, DIN Rail compatible base
Application:-
- All types 24V-DC PLC, HMI, etc.,
Where to Use:
Noisy industrial lines like DC inductive load switching
Industrial power panels
Requiring a Load dump feature
open Long DC caballing in panel board
| Part No | SPD-24V-DC |
|---|---|
| Brand | Veawe |
| Mounting Type | DIN Rail |
| Warranty | 1 Year |
| Country of Origin | Made in India |
You may also like…
4-20mA Surge Protection Device SPD 4 to 20mA
- Three-stage SPD-20mA surge protection device meets standard
protection against power surges, voltage surges and
disturbances with three stages of protection.
- Housed in a din rail panel mount case with a protected earth
ground.
- In order to work properly, it is important to have a good
connection in E terminal to solid earth ground.
- Unknown electronic device failure and misbehave in controller
units might be avoided by using SPD-20mA
Features:
Protection provided by high energy MOV and TVS
Replaceable modular design, DIN Rail compatible base
All types of 20mA current loop devices, Also works for HART
interface
Where to Use:
*Noisy industrial lines like DC inductive load switching
*Industrial power panels
*Solar plants
*Gas stations
Ethernet Surge Protection Device SPD-ETH-RJ45
Ethernet SPD – Surge Protection Device
Protect your Ethernet network equipment from sudden voltage surges and transient overvoltage with our reliable Ethernet Surge Protection Device.
Designed for Ethernet communication lines, it helps safeguard network switches, routers, IP cameras, access points, and other connected equipment.
Key Features:
- High-speed Ethernet surge protection
- Protects against lightning-induced surges and transient voltage
- Compatible with Ethernet and PoE network applications
- Compact and easy-to-install design
- Helps reduce equipment damage and network downtime
- Suitable for CCTV, IP cameras, LAN networks, PoE switches, and communication systems
- Durable construction for reliable long-term operation
- Ideal for indoor and outdoor network installations
Applications:
LAN networks, IP CCTV cameras, network switches, routers, wireless access points, telecom and data communication equipment.
Product Benefit:
The Ethernet SPD provides an additional layer of protection for sensitive network equipment, helping maintain stable communication and extending equipment service life.
Features:-
Protection provided by high energy MOV and TVS
Replaceable modular design, DIN Rail compatible base
Application:-
All types PLC, HMI, IP Cameras, Outdoor ethernet
cabling, etc.,
Where to Use:
Noisy industrial lines like DC inductive load switching
Industrial power panels
Surge Protection Device 230V SPD / Single Phase SPD
Three-stage SPD230V surge protection device meets standard protection against power surges, voltage surges and
disturbances with three stages of protection.
Housed in a din rail panel mount case with a protected earth ground.
In order to work properly, it is important to have a good connection in E terminal to solid earth ground.
Unknown electronic device failure and misbehave in controller units might be avoided by using SPD-230V
Surge Protection Device RS485 SPD-RS485
Three-stage SPD485 surge protection device meets standard protection against power surges, voltage surges,
common mode line noise and disturbances with three stages of protection and filter each supported with Transient
Voltage Suppressor (TVS).
Housed in a din rail panel mount case with a protected earth ground.
In order to work properly, it is important to have a good connection in E terminal to solid earth ground.
Related products
Current Source Simulator 0/4 to 20mA
The Analog Source Generator(0-20mA) will assist
maintenance personnel and integrators in analog input testing
troubleshooting and application development.
This device is handy for testing Sensor data with PLC’s
analog input variants like gas/liquid sensor. Also useful for
measuring data from Pressure sensor, Strain Gauge Sensor,
Temperature Sensor, Level Sensor, Position Sensor etc.
Current Source Simulator Without Display
The Analog Source Generator(0-20mA) will assist
maintenance personnel and integrators in analog input testing
troubleshooting and application development.
This device is handy for testing Sensor data with PLC’s
analog input variants like gas/liquid sensor. Also useful for
measuring data from Pressure sensor, Strain Gauge Sensor,
Temperature Sensor, Level Sensor, Position Sensor etc.
Dual Output Current Source Simulator 0 to 20mA
Perfect 3 wire 0-20mA Signal Source Generator – Dual
Output
Power Supply
24V DC External
Current Output
Output Range 0/4-20mA
Output Accuracy ±1% of full scale
Load range 10 Ω ~ 1.1k Ω
Protection
Input Reverse Polarity, Output Short Circuit Protection
DIMENSION
Product size 70 x 50 x 85 mm
Din rail mountable
Variable using 5 turns Potentiometer.
Selectable range 0 mA ~ 20 mA in 0.01mA steps
resolution or more.
0 ~ 20mA or 4 ~ 20mA selection by external jumper.
Current output values are set by rotating the knob.
Industrial Isolated USB Repeater UC-ISO-USB-24V
- 5 kV RMS Galvanic Isolation: Complete optical and galvanic protection shielding host PCs and PLCs from high-voltage field transients and ground loops.
- 1,500 Vrms Working Voltage: Industrial working voltage barrier between host and downstream peripheral equipment.
- External 24V DC Industrial Power: Downstream circuit and peripheral powered by a rugged 12–28V DC industrial field supply (provides clean 5V DC @ 500mA to USB device).
- USB Type-C Host & Type-A Device Ports: Modern, reversible Type-C connection to PC host and robust Type-A receptacle for industrial peripherals.
- Full & Low Speed USB Auto-Switching: Compatible with USB 2.0 Full Speed (12 Mbps) and Low Speed (1.5 Mbps) industrial devices without jumper configuration.
- Comprehensive Surge & ESD Protection: Built-in 600W TVS clamping, ±15 kV ESD (IEC 61000-4-2), and 12A lightning surge suppression (IEC 61000-4-5).
- Dual LED Power Diagnostics: Dedicated power indicator LEDs for both Host and Device domains for instant troubleshooting.
- Compact DIN Rail Mounting: Enclosed in a compact 60 mm x 50 mm x 20 mm industrial housing with an integrated 35 mm DIN rail clip.
Isolated Analog Signal Converter 10V – 10V
Features:-
2 Way isolation up to 1KVrms
Compact design suitable for both DIN Rail and wall
mount
1 Year Warranty against any manufacturing defects.
Customizable Input voltages available on order
Input Signal type : 0-10V DC
Output Signal type : 0-10V DC
Accuracy : Less than +/- 1% @ 25°C ambient temperature
Input Supply Voltage : 24V DC
Voltage Source Simulator 0-10V (USS10V24V-D)
The Analog Source Generator(0-10v) will assist
maintenance personnel and integrators in analog input testing
troubleshooting and application development.
This device is handy for testing Sensor data with PLC’s
analog input variants like gas/liquid sensor. Also useful for
measuring data from Pressure sensor, Strain Gauge Sensor,
Temperature Sensor, Level Sensor, Position Sensor etc..,
SPECIFICATION
Functionality
Perfect 0-10v Signal Source Generator
Power Supply
24V DC External
Display
4 digit Segment display
Voltage Output
Output Range 0-10V DC
Output Accuracy ±1% of full scale
Load range 100mA Max
Protection
Input Reverse Polarity , Output Short Circuit Protection
DIMENSION
Product size 48x48x90mm.
Preffered Panel cut out 45x45mm.
Reviews
There are no reviews yet.