8 Channel 20mA Modbus Input Module UIO-8IN-20mA
Original price was: ₹8,000.00.₹5,900.00Current price is: ₹5,900.00.
–
Key Features
- 8 Channel 0–20mA Analog Inputs
- 16-bit analog resolution
- Factory calibrated accuracy: ± 0.1% from upper-range
- Raw analog value resolution in steps of 0.001mA
- Sensor open / broken wire indication
- Configurable individual alarms indication
- Retentive alarm counters on power cycle
- Individual channel offset and gain calibration
- Integer and IEEE754 float value support
- Modbus RTU over Isolated RS-485
- Modbus RTU remote write master mode
- Easy to use free ModViz software
- Rotary address switch for address selection from 1 to 99
- Wide Supported baud rates from 300 to 115200
- DIN rail mountable
- Dimensions: 110mm × 50mm × 55mm
The Veawe UIO-8IN-20mA is a compact 8-channel Modbus RTU remote I/O module.
designed for reliable acquisition of 0–20mA analog signals from industrial transmitters and sensors.
It provides 16-bit resolution, factory-calibrated accuracy of ±0.1% of upper range, and 0.001mA raw-value resolution,
with support for both integer and IEEE754 floating-point engineering values.
Each channel supports individual calibration and configurable alarm monitoring, including sensor-open detection and retentive alarm counters.
With isolated RS-485 Modbus RTU, flexible baud rates, rotary address selection.
Free ModViz configuration and monitoring software.
This module provides a practical interface for connecting pressure, temperature, level, flow and
other 4–20mA/0–20mA transmitters to PLC, SCADA, and industrial automation systems.
Configuration Software
| Brand | Veawe |
|---|---|
| Bus Interface Type | RS485 |
| Bus Isolation Voltage | 3000 Vrms |
| Channels | 8-channel |
| Country of Origin | Made in India |
| Input Signal Type | 0 to 20mA, 4 to 20mA |
| Isolation | Isolated RS485 |
| Mounting Type | DIN Rail, Wall Mount |
| Output Accuracy | 0.1% |
| Protection | ESD, Reverse Polarity |
| Protocol | Modbus RTU |
| Resolution | 16 bit |
| Supply Voltage | 24V DC |
| Warranty | 1 Year |
| Part No | UIO-8IN-20MA |
| Controle Type | Analog |
You may also like…
Surge Protection Device RS485 SPD-RS485
Three-stage SPD485 surge protection device meets standard protection against power surges, voltage surges,
common mode line noise and disturbances with three stages of protection and filter each supported with Transient
Voltage Suppressor (TVS).
Housed in a din rail panel mount case with a protected earth ground.
In order to work properly, it is important to have a good connection in E terminal to solid earth ground.
UIO- 4AI 4DI 4RO Modbus Module
- Four Channel 0 ~ 20mA 16 bit Resolution ADC
- 4 digital inputs and 4 relay outputs with LED indication for all IO’s
- RS485 interface output with Modbus RTU Slave
- Suitable for all types of Industrial Machine Automation, IoT, IO Expansion, Remote monitoring
- Convenient address selection rotatory switch from 1 – 99 Address
- Complete range of baud rate settings supported
- Suitable for both Din Rail and Wall Mountable
Product Dimensions 110mm x 50mm x 55mm (L x W x H)
USB to RS485 Converter UC-RS485
*Connecting to Industrial Field buses, remote devices to a latest Computer becomes
difficult due to obsolete of the RS232C ports by Computer Manufactures.
*But with the vast use of equipments with these interfaces needs a connection with PC for monitoring, configuring and working.
*Most of the market available converters are not equipments with proper ESD protection circuits to work longer and with an industry equipment.
*So we have our most suitable converter for both Industrial environment and general usage.
In most case of Windows 10/11 and Linux the driver will be installed automatically when the PC is connected to the Internet.
https://ftdichip.com/wp-content/uploads/2023/09/CDM-v2.12.36.4-WHQL-Certified.zip
Related products
4 Digital Input 4 Digital Output Modbus Module UIO-4DI4DO
- 4 digital inputs and 4 digital outputs with LED indication for all IO’s
- RS485 interface output with Modbus RTU Slave
- Suitable for all types of Industrial Machine Automation, IoT, IO Expansion, Remote monitoring
- Convenient address selection rotatory switch from 1 – 99 Address
- Complete range of baud rate settings supported
- Suitable for both Din Rail and Wall Mountable
Product Dimensions 110mm x 50mm x 55mm (L x W x H)
Loadcell to Modbus Transmitter
- One Load Cell / Strain Gauge input to Modbus RTU
- Two modes of operation – Scale Mode and Force Mode
- 20-bit resolution analog to digital precision conditioner
- Clean analog front-end designed for industrial environments
- Free software based easy configuration
- Integer and IEEE754 float value support
- Modbus RTU over RS-485
- DIP switch for address selection from 1 to 15
- Wide Supported baud rates from 300 to 115200
- DIN Rail mount support
- Dimensions: 60mm x 50mm x 20mm (L x W x H)
temperature humidity sensors to Modbus RTU RS485
The MIO-DES1 Modbus IO Module is a compact digital environmental sensor interface designed for industrial monitoring and automation.
It supports DS18B20 and SHT40 sensors with Modbus RS-485 communication, providing temperature and humidity data.
Multiple Digital Sensors support
Modbus RS-485 Protocol Interface.
Convenient address selection dip switch from 1 – 15 Address
Complete range of baud rate settings supported
Sensor open indication, Analog values in integer and float values
Product Dimensions 60mm x 50mm x 20mm (L x W x H)
Reviews
There are no reviews yet.