USB to RS485 Converter UC-RS485
Original price was: ₹1,800.00.₹1,100.00Current price is: ₹1,100.00.
*Connecting to Industrial Field buses, remote devices to a latest Computer becomes
difficult due to obsolete of the RS232C ports by Computer Manufactures.
*But with the vast use of equipments with these interfaces needs a connection with PC for monitoring, configuring and working.
*Most of the market available converters are not equipments with proper ESD protection circuits to work longer and with an industry equipment.
*So we have our most suitable converter for both Industrial environment and general usage.
In most case of Windows 10/11 and Linux the driver will be installed automatically when the PC is connected to the Internet.
https://ftdichip.com/wp-content/uploads/2023/09/CDM-v2.12.36.4-WHQL-Certified.zip
Specification
Supports all Baud Rates from 300 to 250 kBaud.
actual baud rate varies on the cable length
- Supports up-to 256 receivers on the bus
– also depends on the other devices connected in the RS485 network
– Works with all type of industrial equipments
– PC, PLC, SCADA, HMI, AC/DC Drives, Genset, UPS, Development Kits, etc.
– RS485 Rx and Tx light indications for easy visibility and troubleshooting
– ESD protection for RS485 pins
– ±15-kV Human-Body Model (HBM)
– ±8-kV IEC1000-4-2, Contact Discharge
– ±15-kV IEC1000-4-2, Air-Gap Discharge
– ESD protection for USB
– >±2-kV Human-Body Model (HBM)
– >±200-kV Machine Mode (MM)
– >±500-kV Charged device mode (CDM)
– Very compact size 60mm x 40mm x 20mm
– Easy replaceable micro-USB Cable
– 1 Year Warranty against any manufacturing defects
Electrical characteristics
Power Input : 5V DC from USB Cable
Operating Temperature : 0 ~ 85 °C
Working Current : 200mA Max
RS485 in Receive input : ± 12V between A and B max
RS485 in Transmit output : A pulled up to +5V, B pulled down to 0V
RS485 Termination : 120 Ω between A and B built-in
| Dimensions | 60mm x 50mm x 20mm |
|---|---|
| Part No | UC-RS485 |
| Brand | Veawe |
| Bus Interface Type | USB to RS485 |
| Channels | 1 Channel |
| Chipset | FTDI |
| Protocol | Transparent Serial, Modbus RTU |
| Baud Rate | 300 bps ~ 250 kbps |
| Port Type | USB Type-C, Screw Terminal |
| Supply Voltage | 5V – USB Powered |
| Isolation | Non-Isolated |
| Protection | ESD Protection (±15kV RS485, ±2kV USB) |
| Mounting Type | Desktop |
| Warranty | 1 Year |
| Country of Origin | Made in India |
You may also like…
Ethernet to RS485 Converter UC-ETH-RS485
Features
- Works with all type of industrial equipments
– PC, PLC, SCADA, HMI, AC/DC Drives, Genset, UPS, Development Kits, etc.
RS485 Rx and Tx light indications for easy visibility and troubleshooting
RJ45 Status light indications, RJ45 built-in 2KV isolation
Easy to use web page configuration option
Unique MAC address
Compact design suitable for both DIN Rail and Wall mount
Support 10/100M, TCP Server, TCP Client, UDP, Httpd Client, Web socket
Supports Transparent Mode data transmission
Supports Modbus TCP to Modbus RTU protocol conversion
ESD and Surge protection for Ethernet, RS485 and Power
Supports all Baud Rates from 300 to 250 kBaud.– varies on cable length
Supports up-to 256 receivers on the bus
– also depends on the other devices connected in the RS485 network
- ESD protection for RS485 pins
– ±15-kV Human-Body Model (HBM)
– ±8-kV IEC1000-4-2, Contact Discharge
– ±15-kV IEC1000-4-2, Air-Gap Discharge
- 1 Year Warranty against any manufacturing defects
Surge Protection Device RS485 SPD-RS485
Three-stage SPD485 surge protection device meets standard protection against power surges, voltage surges,
common mode line noise and disturbances with three stages of protection and filter each supported with Transient
Voltage Suppressor (TVS).
Housed in a din rail panel mount case with a protected earth ground.
In order to work properly, it is important to have a good connection in E terminal to solid earth ground.
USB to ISO RS485 Converter UC-ISO-RS485
Specification
Isolated RS485 Power up to 1KVrms
Isolated RS485 Signals up to 2.5KVrms
Extended Common mode voltage between A an B ±25V
Works with all type of industrial equipments
– PC, PLC, SCADA, HMI, AC/DC Drives, Genset, UPS, Development Kits, etc.
USB Power, RS485 Rx and Tx light indications for easy visibility and troubleshooting
ESD and Surge protection for USB, RS485 and Power
Supports all Baud Rates from 300 to 250 kBaud.
– varies on cable length
- Supports up-to 256 receivers on the bus
– also depends on the other devices connected in the RS485 network
Very compact size 60mm x 40mm x 20mm
ESD protection for RS485 pins
– ±16-kV Human-Body Model (HBM)
– ±8-kV IEC1000-4-2, Contact Discharge
– ±15-kV IEC1000-4-2, Air-Gap Discharge
- ESD protection for USB
– ±2-kV Human-Body Model (HBM)
– ±200-kV Machine Mode (MM)
– ±500-kV Charged device mode (CDM)
- 1 Year Warranty against any manufacturing defects
In most case of Windows 10/11 and Linux the driver will be installed automatically when the PC is connected to the Internet.
https://ftdichip.com/wp-content/uploads/2023/09/CDM-v2.12.36.4-WHQL-Certified.zip
USB to RS232 Converter UC-RS232
*Connecting to Industrial Field buses, remote devices to a latest Computer becomes
difficult due to obsolete of the RS232C ports by Computer Manufactures.
*But with the vast use of equipments with these interfaces needs a connection with PC for monitoring, configuring and working.
*Most of the market available converters are not equipments with proper ESD protection circuits to work longer and with an industry equipment.
*So we have our most suitable converter for both Industrial environment and general usage.
In most case of Windows 10/11 and Linux the driver will be installed automatically when the PC is connected to the Internet.
https://ftdichip.com/wp-content/uploads/2023/09/CDM-v2.12.36.4-WHQL-Certified.zip
Related products
2 Channel Analog Input Modbus RTU RS485 Module
- One 0 – 20mA and one 0 – 36V DC Analog Inputs
- 16-bit analog resolution
- Modbus RS-485 Protocol Interface.
- Integer and IEEE754 float value support
- Offset and Gain support
- Convenient address selection dip switch from 1 – 15 Address
- Complete range of baud rate settings supported
- Sensor open indication, Analog values in integer and float values
- DIN Rail mount support
- Product Dimensions 60mm x 50mm x 20mm (L x W x H)
Ethernet Dual RS232 Converter UC-ETH-RS232-D
Features
- Works with all type of industrial equipments
– PC, PLC, SCADA, HMI, AC/DC Drives, Genset, UPS, Development Kits, etc.
RS232 Rx and Tx light indications for easy visibility and troubleshooting
RJ45 Status light indications, RJ45 built-in 2KV isolation
Easy to use web page configuration option
Unique MAC address
Dimension in mm – 110 x 74 x 70
Support 10/100M, TCP Server, TCP Client, UDP, Httpd Client, Web socket
Supports Transparent Mode data transmission
Supports Modbus TCP to Modbus RTU protocol conversion on both ports
ESD and Surge protection for Ethernet, RS232 and Power
Compact design suitable for both DIN Rail and Wall mount
12~24V DC Supply
1 Year Warranty against any manufacturing defects
Ethernet to Dual RS485 Converter UC-ETH-RS485-D
Features
- Works with all type of industrial equipments
– PC, PLC, SCADA, HMI, AC/DC Drives, Genset, UPS, Development Kits, etc.
RS485 Rx and Tx light indications for easy visibility and troubleshooting
RJ45 Status light indications, RJ45 built-in 2KV isolation
Easy to use web page configuration option* Dimension in mm – 110 x 74 x 35
Support 10/100M, TCP Server, TCP Client, UDP, Httpd Client, Web socket
Supports Transparent Mode data transmission
Supports Modbus TCP to Modbus RTU protocol conversion
ESD and Surge protection for Ethernet, RS485 and Power
Supports all Baud Rates from 300 to 250 kBaud.
– varies on cable length
- Supports up-to 256 receivers on the bus
– also depends on the other devices connected in the RS485 network
- ESD protection for RS485 pins
– ±15-kV Human-Body Model (HBM)
– ±8-kV IEC1000-4-2, Contact Discharge
– ±15-kV IEC1000-4-2, Air-Gap Discharge
12~24V DC Supply
1 Year Warranty against any manufacturing defects
Unique MAC address
Compact design suitable for both DIN Rail and Wall mount
Industrial Isolated USB Repeater UC-ISO-USB-24V
- 5 kV RMS Galvanic Isolation: Complete optical and galvanic protection shielding host PCs and PLCs from high-voltage field transients and ground loops.
- 1,500 Vrms Working Voltage: Industrial working voltage barrier between host and downstream peripheral equipment.
- External 24V DC Industrial Power: Downstream circuit and peripheral powered by a rugged 12–28V DC industrial field supply (provides clean 5V DC @ 500mA to USB device).
- USB Type-C Host & Type-A Device Ports: Modern, reversible Type-C connection to PC host and robust Type-A receptacle for industrial peripherals.
- Full & Low Speed USB Auto-Switching: Compatible with USB 2.0 Full Speed (12 Mbps) and Low Speed (1.5 Mbps) industrial devices without jumper configuration.
- Comprehensive Surge & ESD Protection: Built-in 600W TVS clamping, ±15 kV ESD (IEC 61000-4-2), and 12A lightning surge suppression (IEC 61000-4-5).
- Dual LED Power Diagnostics: Dedicated power indicator LEDs for both Host and Device domains for instant troubleshooting.
- Compact DIN Rail Mounting: Enclosed in a compact 60 mm x 50 mm x 20 mm industrial housing with an integrated 35 mm DIN rail clip.
Isolated RS485 To RS485
Features and Specification
* Isolated RS485 Signals up to 2.5KVrms
* Isolated RS485 Power up to 1KVrms.
* Supports Auto-Direction Control. No flow
control signal required.
– actual baud rate varies on the cable length
– also depends on the other devices connected
in the RS485 network
* Works with all type of industrial equipment
– PC, PLC, SCADA, HMI, AC/DC Drives,
Genset, UPS, Development Kits, etc.
* RS485 Rx and Tx light indications for easy
visibility and troubleshooting
* ESD protection for both RS485 pins
– ±15-kV Human-Body Model (HBM)
– ±8-kV IEC1000-4-2, Contact Discharge
– ±15-kV IEC1000-4-2, Air-Gap Discharge
* Compact design suitable for both DIN Rail and Wall mount
* Dimension in mm – 110 x 74 x 35
* 1 Year Warranty against any manufacturing
defects
Reviews
There are no reviews yet.