Isolated RS232 To RS232 Repeater
Original price was: ₹4,000.00.₹2,500.00Current price is: ₹2,500.00.
Features and Specification
   * Isolated RS485 Signals up to 2.5KVrms
   * Isolated RS485 Power up to 1KVrms.
   * Supports Auto-Direction Control. No flow
       control signal required.
     – actual baud rate varies on the cable length
– also depends on the other devices connected
       in the RS485 network
   * Works with all type of industrial equipment
     – PC, PLC, SCADA, HMI, AC/DC Drives,
      Genset, UPS, Development Kits, etc.
   * RS485 Rx and Tx light indications for easy
      visibility and troubleshooting
   * ESD protection for both RS485 pins
– ±15-kV Human-Body Model (HBM)
– ±8-kV IEC1000-4-2, Contact Discharge
– ±15-kV IEC1000-4-2, Air-Gap Discharge
   * Compact design suitable for both DIN Rail and Wall mount
   * Dimension in mm – 110 x 74 x 35
   * 1 Year Warranty against any manufacturing
       defects
3 in stock
Application
* Isolated RS232 Signals up to 2.5Vrms
- Isolated RS232 Power up to 1KVrms.
- Supports all Baud Rates from 300 to 250 kBaud.
- actual baud rate varies on the cable length
- Works with all type of industrial equipments
– PC, PLC, SCADA, HMI, AC/DC Drives,
Genset,
UPS, Development Kits, etc. - RS232 Rx and Tx light indications for easy
visibility and troubleshooting - ESD protection for both RS232 port pins
– ±15-kV Human-Body Model (HBM)
– ±8-kV IEC1000-4-2, Contact Discharge
– ±15-kV IEC1000-4-2, Air-Gap Discharge - Compact design suitable for both DIN Rail and
Wall mount - Dimension in mm – 110 x 74 x 35
- 1 Year Warranty against any manufacturing
defects
Electrical Characteristics
Power Input: 9V~24V DC
Operating Temperature: 0 ~ 85 °C
Working Current: 200mA Max
RS232 Connector: DB9 Male as per RS232C
Dimention: 110 x 74 x 35
| Part No | UC-ISO-232-232 |
|---|---|
| Brand | Veawe |
| Bus Interface Type | Isolated RS232 to RS232 |
| Channels | 1 Channel |
| Protocol | Transparent Serial |
| Baud Rate | 300 bps ~ 250 kbps |
| Port Type | DB9 Female, Screw Terminal |
| Supply Voltage | 24V DC (9V ~ 24V DC) |
| Isolation | 2.5 kV RMS Signal, 1 kV RMS Power |
| Protection | ESD Protection (±15kV), TVS Surge Clamping, Reverse Polarity |
| Mounting Type | DIN Rail, Wall Mount |
| Dimensions | 110mm x 74mm x 35mm |
| Warranty | 1 Year |
| Country of Origin | Made in India |
You may also like…
Isolated RS232 To RS485
Isolated RS485 Signals up to 2.5Vrms
Isolated RS485 Power up to 1KVrms.
Supports Auto-Direction Control. No flow
control signal required.
- Supports all Baud Rates from 300 to 250
kBaud.
– actual baud rate varies on the cable length
– also depends on the other devices
connected in the RS485 network
- Works with all type of industrial equipments
– PC, PLC, SCADA, HMI, AC/DC Drives,
Genset, UPS, Development Kits, etc.
- RS485 Rx and Tx light indications for easy
visibility and troubleshooting
- ESD protection for RS232 and RS485 pins
– ±15-kV Human-Body Model (HBM)
– ±8-kV IEC1000-4-2, Contact Discharge
– ±15-kV IEC1000-4-2, Air-Gap Discharge
- Compact design suitable for both DIN Rail and
Wall mount
Dimension in mm – 110 x 74 x 35
1 Year Warranty against any manufacturing
defects
Isolated RS485 To RS485
Features and Specification
   * Isolated RS485 Signals up to 2.5KVrms
   * Isolated RS485 Power up to 1KVrms.
   * Supports Auto-Direction Control. No flow
       control signal required.
     – actual baud rate varies on the cable length
– also depends on the other devices connected
       in the RS485 network
   * Works with all type of industrial equipment
     – PC, PLC, SCADA, HMI, AC/DC Drives,
      Genset, UPS, Development Kits, etc.
   * RS485 Rx and Tx light indications for easy
      visibility and troubleshooting
   * ESD protection for both RS485 pins
– ±15-kV Human-Body Model (HBM)
– ±8-kV IEC1000-4-2, Contact Discharge
– ±15-kV IEC1000-4-2, Air-Gap Discharge
   * Compact design suitable for both DIN Rail and Wall mount
   * Dimension in mm – 110 x 74 x 35
   * 1 Year Warranty against any manufacturing
       defects
USB to RS232 Converter UC-RS232
*Connecting to Industrial Field buses, remote devices to a latest Computer becomes
difficult due to obsolete of the RS232C ports by Computer Manufactures.
*But with the vast use of equipments with these interfaces needs a connection with PC for monitoring, configuring and working.
*Most of the market available converters are not equipments with proper ESD protection circuits to work longer and with an industry equipment.
*So we have our most suitable converter for both Industrial environment and general usage.
In most case of Windows 10/11 and Linux the driver will be installed automatically when the PC is connected to the Internet.
https://ftdichip.com/wp-content/uploads/2023/09/CDM-v2.12.36.4-WHQL-Certified.zip
USB to RS485 Converter UC-RS485
*Connecting to Industrial Field buses, remote devices to a latest Computer becomes
difficult due to obsolete of the RS232C ports by Computer Manufactures.
*But with the vast use of equipments with these interfaces needs a connection with PC for monitoring, configuring and working.
*Most of the market available converters are not equipments with proper ESD protection circuits to work longer and with an industry equipment.
*So we have our most suitable converter for both Industrial environment and general usage.
In most case of Windows 10/11 and Linux the driver will be installed automatically when the PC is connected to the Internet.
https://ftdichip.com/wp-content/uploads/2023/09/CDM-v2.12.36.4-WHQL-Certified.zip
Related products
Current Source Simulator 0/4 to 20mA
The Analog Source Generator(0-20mA) will assist
maintenance personnel and integrators in analog input testing
troubleshooting and application development.
This device is handy for testing Sensor data with PLC’s
analog input variants like gas/liquid sensor. Also useful for
measuring data from Pressure sensor, Strain Gauge Sensor,
Temperature Sensor, Level Sensor, Position Sensor etc.
Current Source Simulator Without Display
The Analog Source Generator(0-20mA) will assist
maintenance personnel and integrators in analog input testing
troubleshooting and application development.
This device is handy for testing Sensor data with PLC’s
analog input variants like gas/liquid sensor. Also useful for
measuring data from Pressure sensor, Strain Gauge Sensor,
Temperature Sensor, Level Sensor, Position Sensor etc.
Ethernet Dual RS232 Converter UC-ETH-RS232-D
Features
- Works with all type of industrial equipments
– PC, PLC, SCADA, HMI, AC/DC Drives, Genset, UPS, Development Kits, etc.
RS232 Rx and Tx light indications for easy visibility and troubleshooting
RJ45 Status light indications, RJ45 built-in 2KV isolation
Easy to use web page configuration option
Unique MAC address
Dimension in mm – 110 x 74 x 70
Support 10/100M, TCP Server, TCP Client, UDP, Httpd Client, Web socket
Supports Transparent Mode data transmission
Supports Modbus TCP to Modbus RTU protocol conversion on both ports
ESD and Surge protection for Ethernet, RS232 and Power
Compact design suitable for both DIN Rail and Wall mount
12~24V DC Supply
1 Year Warranty against any manufacturing defects
Ethernet to RS485 Converter UC-ETH-RS485
Features
- Works with all type of industrial equipments
– PC, PLC, SCADA, HMI, AC/DC Drives, Genset, UPS, Development Kits, etc.
RS485 Rx and Tx light indications for easy visibility and troubleshooting
RJ45 Status light indications, RJ45 built-in 2KV isolation
Easy to use web page configuration option
Unique MAC address
Compact design suitable for both DIN Rail and Wall mount
Support 10/100M, TCP Server, TCP Client, UDP, Httpd Client, Web socket
Supports Transparent Mode data transmission
Supports Modbus TCP to Modbus RTU protocol conversion
ESD and Surge protection for Ethernet, RS485 and Power
Supports all Baud Rates from 300 to 250 kBaud.– varies on cable length
Supports up-to 256 receivers on the bus
– also depends on the other devices connected in the RS485 network
- ESD protection for RS485 pins
– ±15-kV Human-Body Model (HBM)
– ±8-kV IEC1000-4-2, Contact Discharge
– ±15-kV IEC1000-4-2, Air-Gap Discharge
- 1 Year Warranty against any manufacturing defects
Isolated Analog Signal Converter 70V to 20mA
Features:-
2 Way isolation up to 1KVrms
Compact design suitable for both DIN Rail and wall
mount
1 Year Warranty against any manufacturing defects.
Customizable Input voltages available on order
Input Signal type : 0-70V DC
Output Signal type : 4-20mA DC
Accuracy : Less than +/- 1% @ 25°C ambient temperature
Input Supply Voltage : 24V DC
Isolated Analog Signal Converter J Type
Features:-
2 Way isolation up to 1KVrms
Compact design suitable for both DIN Rail and wall
mount
1 Year Warranty against any manufacturing defects.
Customizable Input voltages available on order
Input Signal type : J – type
Output Signal type : 0/4 – 20mA
Accuracy : Less than +/- 1% @ 25°C ambient temperature
Input Supply Voltage : 24V DC
Reviews
There are no reviews yet.