Voltage and Current Source Simulator Without Display (USS10V20MA)
Original price was: ₹7,000.00.₹3,500.00Current price is: ₹3,500.00.
Features:-
- Dual Output Signal Simulation: 1 Channel 0–10V DC Voltage Source and 1 Channel 0/4–20mA DC Current Source.
- Independent Dial Controls: Precision analog potentiometers for simultaneous voltage and current signal adjustment.
- Without Display Operation: Rugged, direct analog dial control ideal for fast testing and commissioning without digital menus.
- Jumper-Selectable Current Span: Select between 0–20mA (Jumper Closed) and 4–20mA (Jumper Open).
- Compact Design: Standard 35mm DIN Rail and panel mount enclosure suitable for industrial control cabinets.
- Industrial Protection: Built-in input reverse polarity protection and output short-circuit protection.
- 24V DC Supply: Operates directly from standard industrial 24V DC automation power.
The Veawe USS10V20MA (V & I Source Simulator) is a dual-channel analog signal simulator designed for industrial automation engineers, PLC programmers, panel builders, and maintenance technicians. It combines a 0–10V DC voltage source and an active 0/4–20mA DC current source into a single compact DIN-rail unit without requiring a digital display.
Equipped with dual precision analog dials, the simulator allows simultaneous testing, calibration, and loop simulation of voltage and current inputs on PLCs, DCS systems, RTUs, paperless recorders, PID controllers, and analog indicators.
Key Features
- Dual Independent Channels: Generates 0–10V DC on Channel 1 (CH1) and 0/4–20mA DC on Channel 2 (CH2) simultaneously.
- Without Display Simplicity: Direct potentiometer knobs allow instantaneous adjustment across full spans without navigating digital menu trees.
- Selectable Current Range: Configure Channel 2 for 0–20mA or standard 4–20mA operation via the front panel jumper terminals (Close = 0–20mA, Open = 4–20mA).
- Integrated Protection: Includes reverse polarity protection on the 24V DC power input and output short-circuit protection.
- Standard 35mm DIN Rail Mount: Easily mounts onto standard 35mm DIN rails or flat panel surfaces.
Technical Specifications
| Parameter | Specification |
|---|---|
| Model / SKU | USS10V20MA |
| Product Type | Dual Channel V & I Source Simulator (Without Display) |
| Channel 1 Output (Voltage) | 0 to 10V DC (Terminals: CH1+, CH1-) |
| Channel 2 Output (Current) | 0 to 20mA / 4 to 20mA DC (Terminals: CH2+, CH2-) |
| Current Mode Selection | Jumper: Close for 0–20mA, Open for 4–20mA |
| Control Mechanism | Dual analog multi-turn potentiometer knobs (10V and 20mA) |
| Power Supply | 24V DC (12 ~ 28V DC external supply, Terminals: +, -) |
| Power Indicator | Red LED for 24V DC input status |
| Output Accuracy | ±1% of full scale |
| Load Impedance (Current Loop) | 10 Ω to 500 Ω |
| Mounting | 35mm DIN Rail Mount, Wall Mount |
| Enclosure Dimensions | 70 mm x 50 mm x 85 mm |
| Operating Temperature | -10°C to +60°C |
Applications
- PLC and DCS analog input card testing and verification (0-10V and 4-20mA channels).
- SCADA telemetry commissioning and loop check-out.
- Control valve, actuator, and VFD reference signal simulation.
- Signal injection and troubleshooting in industrial process instrumentation.
| Brand | Veawe |
|---|---|
| Part No | USS10V20MA |
| Signal Type | Dual Output V & I Source Simulator |
| Channels | 2 Channel |
| Output Channels | 1x 0-10V DC & 1x 0/4-20mA DC |
| Voltage Output | 0 to 10V DC |
| Current Output | 0 to 20mA, 4 to 20mA DC |
| Control Type | Analog Multi-turn Potentiometer Dials (Without Display) |
| Supply Voltage | 24V DC (12 ~ 28V DC) |
| Mounting Type | DIN Rail, Wall Mount |
| Output Accuracy | ±1% of full scale |
| Protection | Input Reverse Polarity, Output Short Circuit Protection |
| Warranty | 1 Year |
| Country of Origin | Made in India |
| Dimensions | 70mm x 50mm x 85mm |
You may also like…
4-20mA Surge Protection Device SPD 4 to 20mA
- Three-stage SPD-20mA surge protection device meets standard
protection against power surges, voltage surges and
disturbances with three stages of protection.
- Housed in a din rail panel mount case with a protected earth
ground.
- In order to work properly, it is important to have a good
connection in E terminal to solid earth ground.
- Unknown electronic device failure and misbehave in controller
units might be avoided by using SPD-20mA
Features:
Protection provided by high energy MOV and TVS
Replaceable modular design, DIN Rail compatible base
All types of 20mA current loop devices, Also works for HART
interface
Where to Use:
*Noisy industrial lines like DC inductive load switching
*Industrial power panels
*Solar plants
*Gas stations
Current Source Simulator 0/4 to 20mA
The Analog Source Generator(0-20mA) will assist
maintenance personnel and integrators in analog input testing
troubleshooting and application development.
This device is handy for testing Sensor data with PLC’s
analog input variants like gas/liquid sensor. Also useful for
measuring data from Pressure sensor, Strain Gauge Sensor,
Temperature Sensor, Level Sensor, Position Sensor etc.
Current Source Simulator Without Display
The Analog Source Generator(0-20mA) will assist
maintenance personnel and integrators in analog input testing
troubleshooting and application development.
This device is handy for testing Sensor data with PLC’s
analog input variants like gas/liquid sensor. Also useful for
measuring data from Pressure sensor, Strain Gauge Sensor,
Temperature Sensor, Level Sensor, Position Sensor etc.
Dual Output Current Source Simulator 0 to 20mA
Perfect 3 wire 0-20mA Signal Source Generator – Dual
Output
Power Supply
24V DC External
Current Output
Output Range 0/4-20mA
Output Accuracy ±1% of full scale
Load range 10 Ω ~ 1.1k Ω
Protection
Input Reverse Polarity, Output Short Circuit Protection
DIMENSION
Product size 70 x 50 x 85 mm
Din rail mountable
Variable using 5 turns Potentiometer.
Selectable range 0 mA ~ 20 mA in 0.01mA steps
resolution or more.
0 ~ 20mA or 4 ~ 20mA selection by external jumper.
Current output values are set by rotating the knob.
Voltage Source Simulator 0-10V (USS10V24V-D)
The Analog Source Generator(0-10v) will assist
maintenance personnel and integrators in analog input testing
troubleshooting and application development.
This device is handy for testing Sensor data with PLC’s
analog input variants like gas/liquid sensor. Also useful for
measuring data from Pressure sensor, Strain Gauge Sensor,
Temperature Sensor, Level Sensor, Position Sensor etc..,
SPECIFICATION
Functionality
Perfect 0-10v Signal Source Generator
Power Supply
24V DC External
Display
4 digit Segment display
Voltage Output
Output Range 0-10V DC
Output Accuracy ±1% of full scale
Load range 100mA Max
Protection
Input Reverse Polarity , Output Short Circuit Protection
DIMENSION
Product size 48x48x90mm.
Preffered Panel cut out 45x45mm.
Related products
4 Channel 20mA Modbus UIO-4IN-20mA
Default mode is handy when the serial communication setting are forgotten. Setting the Address switch to 00 will put the device in default mode Address Set to 00 – Default mode ON – Slave Address – 1, Baud 19200, 8N1 Address Set to non 00 – Default mode OFF
– As per the saved configuration values.
Current Source Simulator -230VAC Input Supply ( 0 – 20mA )
The Analog Source Generator(0-20mA) will assist
maintenance personnel and integrators in analog input testing
troubleshooting and application development.
This device is handy for testing Sensor data with PLC’s
analog input variants like gas/liquid sensor. Also useful for
measuring data from Pressure sensor, Strain Gauge Sensor,
Temperature Sensor, Level Sensor, Position Sensor etc.
Isolated Analog Signal Converter ±75mV to 20mA
Features:-
2 Way isolation up to 1KVrms
Compact design suitable for both DIN Rail and wall
mount
1 Year Warranty against any manufacturing defects.
Customizable Input voltages available on order
Input Signal type : ±75mV DC (Bidirectional Shunt)
Output Signal type : 4-20mA DC (12mA zero center)
Accuracy : Less than +/- 1% @ 25°C ambient temperature
Input Supply Voltage : 24V DC
Isolated Analog Signal Converter 150V to 20mA
Features:-
2 Way isolation up to 1KVrms
Compact design suitable for both DIN Rail and wall
mount
1 Year Warranty against any manufacturing defects.
Customizable Input voltages available on order
Input Signal type : 0-150V DC
Output Signal type : 4-20mA DC
Accuracy : Less than +/- 1% @ 25°C ambient temperature
Input Supply Voltage : 24V DC
Isolated Analog Signal Converter 300V to 10V
Features:-
2 Way isolation up to 1KVrms
Compact design suitable for both DIN Rail and wall
mount
1 Year Warranty against any manufacturing defects.
Customizable Input voltages available on order
Input Signal type : 0-300V DC
Output Signal type : 0-10V DC
Accuracy : Less than +/- 1% @ 25°C ambient temperature
Input Supply Voltage : 24V DC
Isolated RS232 To RS232 Repeater
Features and Specification
   * Isolated RS485 Signals up to 2.5KVrms
   * Isolated RS485 Power up to 1KVrms.
   * Supports Auto-Direction Control. No flow
       control signal required.
     – actual baud rate varies on the cable length
– also depends on the other devices connected
       in the RS485 network
   * Works with all type of industrial equipment
     – PC, PLC, SCADA, HMI, AC/DC Drives,
      Genset, UPS, Development Kits, etc.
   * RS485 Rx and Tx light indications for easy
      visibility and troubleshooting
   * ESD protection for both RS485 pins
– ±15-kV Human-Body Model (HBM)
– ±8-kV IEC1000-4-2, Contact Discharge
– ±15-kV IEC1000-4-2, Air-Gap Discharge
   * Compact design suitable for both DIN Rail and Wall mount
   * Dimension in mm – 110 x 74 x 35
   * 1 Year Warranty against any manufacturing
       defects
RS232 to RS485 Converter
Connecting to Industrial Field buses, remote devices to a latest Computer becomes
difficult due to obsolete of the RS232C ports by Computer Manufactures. But with the vast
use of equipments with these interfaces needs a connection with PC for monitoring,
configuring and working. Most of the market available converters are not equipments with
proper ESD protection circuits to work longer and with an industry equipment. So we have our
most suitable converter for both Industrial environment and general usage.
Supports Auto-Direction Control. No flow control signal required.
Supports all Baud Rates from 300 to 250 kBaud.
– actual baud rate varies on the cable length
- Supports up-to 256 receivers on the bus
– also depends on the other devices connected in the RS485 network
- Works with all type of industrial equipments
– PC, PLC, SCADA, HMI, AC/DC Drives, Genset, UPS, Development Kits, etc.
RS485 Rx and Tx light indications for easy visibility and troubleshooting
ESD protection for RS232 and RS485 pins
– ±15-kV Human-Body Model (HBM)
– ±8-kV IEC1000-4-2, Contact Discharge
– ±15-kV IEC1000-4-2, Air-Gap Discharge
Very compact size 60mm x 40mm x 20mm
1 Year Warranty against any manufacturing defects
USB to ISO RS485 Converter UC-ISO-RS485
Specification
Isolated RS485 Power up to 1KVrms
Isolated RS485 Signals up to 2.5KVrms
Extended Common mode voltage between A an B ±25V
Works with all type of industrial equipments
– PC, PLC, SCADA, HMI, AC/DC Drives, Genset, UPS, Development Kits, etc.
USB Power, RS485 Rx and Tx light indications for easy visibility and troubleshooting
ESD and Surge protection for USB, RS485 and Power
Supports all Baud Rates from 300 to 250 kBaud.
– varies on cable length
- Supports up-to 256 receivers on the bus
– also depends on the other devices connected in the RS485 network
Very compact size 60mm x 40mm x 20mm
ESD protection for RS485 pins
– ±16-kV Human-Body Model (HBM)
– ±8-kV IEC1000-4-2, Contact Discharge
– ±15-kV IEC1000-4-2, Air-Gap Discharge
- ESD protection for USB
– ±2-kV Human-Body Model (HBM)
– ±200-kV Machine Mode (MM)
– ±500-kV Charged device mode (CDM)
- 1 Year Warranty against any manufacturing defects
In most case of Windows 10/11 and Linux the driver will be installed automatically when the PC is connected to the Internet.
https://ftdichip.com/wp-content/uploads/2023/09/CDM-v2.12.36.4-WHQL-Certified.zip
Reviews
There are no reviews yet.