Current Source Simulator -230VAC Input Supply ( 0 – 20mA )
Original price was: ₹7,000.00.₹4,200.00Current price is: ₹4,200.00.
The Analog Source Generator(0-20mA) will assist
maintenance personnel and integrators in analog input testing
troubleshooting and application development.
This device is handy for testing Sensor data with PLC’s
analog input variants like gas/liquid sensor. Also useful for
measuring data from Pressure sensor, Strain Gauge Sensor,
Temperature Sensor, Level Sensor, Position Sensor etc.
Specification
–
Temperature Sensor, Level Sensor, Position Sensor etc..,
measuring data from Pressure sensor, Strain Gauge Sensor,
analog input variants like gas/liquid sensor. Also useful for
This device is handy for testing Sensor data with PLC’s
troubleshooting and application development.
maintenance personnel and integrators in analog input testing
The Analog Source Generator(0-20mA) will assist
- Functionality
Perfect 3 wire 0-20mA Signal Source Generator
– Protection
Input Reverse Polarity , Output Short Circuit Protection
DIMENSION
Product size – 48x48x90mm. Weight ~ 150 gms
Electrical characteristics
Power Supply
24V DC External
Display
4 digit Segment display
Current Output
Output Range 0/4-20mA
Output Accuracy ±1% of full scale
Load range 10 Ω ~ 1.1k Ω
| Brand | Veawe |
|---|---|
| Channels | 1 channel |
| Country of Origin | Made in India |
| Display Digit | 4 Digit |
| Display Type | LED |
| Encloser Material | ABS |
| Maximum Current Output | 20mA |
| Mounting Type | Panel Mount |
| Output Accuracy | 0.1% |
| Output Range | 0-20mA |
| Part No | USS20M230V-D |
| Phase | Single Phase |
| Supply Voltage | 230V AC |
| Warranty | 1 Year |
| Control Type | Analog Control |
You may also like…
Current Source Simulator 0/4 to 20mA
The Analog Source Generator(0-20mA) will assist
maintenance personnel and integrators in analog input testing
troubleshooting and application development.
This device is handy for testing Sensor data with PLC’s
analog input variants like gas/liquid sensor. Also useful for
measuring data from Pressure sensor, Strain Gauge Sensor,
Temperature Sensor, Level Sensor, Position Sensor etc.
Dual Output Current Source Simulator 0 to 20mA
Perfect 3 wire 0-20mA Signal Source Generator – Dual
Output
Power Supply
24V DC External
Current Output
Output Range 0/4-20mA
Output Accuracy ±1% of full scale
Load range 10 Ω ~ 1.1k Ω
Protection
Input Reverse Polarity, Output Short Circuit Protection
DIMENSION
Product size 70 x 50 x 85 mm
Din rail mountable
Variable using 5 turns Potentiometer.
Selectable range 0 mA ~ 20 mA in 0.01mA steps
resolution or more.
0 ~ 20mA or 4 ~ 20mA selection by external jumper.
Current output values are set by rotating the knob.
Surge Protection Device 230V SPD / Single Phase SPD
Three-stage SPD230V surge protection device meets standard protection against power surges, voltage surges and
disturbances with three stages of protection.
Housed in a din rail panel mount case with a protected earth ground.
In order to work properly, it is important to have a good connection in E terminal to solid earth ground.
Unknown electronic device failure and misbehave in controller units might be avoided by using SPD-230V
Voltage Source Simulator 0-10V (USS10V24V-D)
The Analog Source Generator(0-10v) will assist
maintenance personnel and integrators in analog input testing
troubleshooting and application development.
This device is handy for testing Sensor data with PLC’s
analog input variants like gas/liquid sensor. Also useful for
measuring data from Pressure sensor, Strain Gauge Sensor,
Temperature Sensor, Level Sensor, Position Sensor etc..,
SPECIFICATION
Functionality
Perfect 0-10v Signal Source Generator
Power Supply
24V DC External
Display
4 digit Segment display
Voltage Output
Output Range 0-10V DC
Output Accuracy ±1% of full scale
Load range 100mA Max
Protection
Input Reverse Polarity , Output Short Circuit Protection
DIMENSION
Product size 48x48x90mm.
Preffered Panel cut out 45x45mm.
Related products
DLMS to Modbus Converter
Features
- Supports reading of Cumulative Parameters, Insta Voltage and Current Values and Meter Serial No.
- RS485/RS232/Optical DLMS to RS485 Modbus converter
- 24V DC Input
- Modbus RS-485 Protocol Interface
- Convenient address selection rotatory switch from 1 – 99 Address for modbus
- Complete range of configurable baud rate settings supported for modbus
- Din Rail mounting
- Product Dimensions – 40mm x 110mm x 80mm (L x W x H)
Isolated Analog Signal Converter ±75mV to 20mA
Features:-
2 Way isolation up to 1KVrms
Compact design suitable for both DIN Rail and wall
mount
1 Year Warranty against any manufacturing defects.
Customizable Input voltages available on order
Input Signal type : ±75mV DC (Bidirectional Shunt)
Output Signal type : 4-20mA DC (12mA zero center)
Accuracy : Less than +/- 1% @ 25°C ambient temperature
Input Supply Voltage : 24V DC
Isolated Analog Signal Converter 10V – 10V
Features:-
2 Way isolation up to 1KVrms
Compact design suitable for both DIN Rail and wall
mount
1 Year Warranty against any manufacturing defects.
Customizable Input voltages available on order
Input Signal type : 0-10V DC
Output Signal type : 0-10V DC
Accuracy : Less than +/- 1% @ 25°C ambient temperature
Input Supply Voltage : 24V DC
Isolated Analog Signal Converter 70V to 10V
Features:-
2 Way isolation up to 1KVrms
Compact design suitable for both DIN Rail and wall
mount
1 Year Warranty against any manufacturing defects.
Customizable Input voltages available on order
Input Signal type : 0-70V DC
Output Signal type : 0-10V DC
Accuracy : Less than +/- 1% @ 25°C ambient temperature
Input Supply Voltage : 24V DC
Isolated Analog Signal Converter J Type
Features:-
2 Way isolation up to 1KVrms
Compact design suitable for both DIN Rail and wall
mount
1 Year Warranty against any manufacturing defects.
Customizable Input voltages available on order
Input Signal type : J – type
Output Signal type : 0/4 – 20mA
Accuracy : Less than +/- 1% @ 25°C ambient temperature
Input Supply Voltage : 24V DC
Reviews
There are no reviews yet.