Current Source Simulator 0/4 to 20mA
Original price was: ₹7,000.00.₹4,200.00Current price is: ₹4,200.00.
The Analog Source Generator(0-20mA) will assist
maintenance personnel and integrators in analog input testing
troubleshooting and application development.
This device is handy for testing Sensor data with PLC’s
analog input variants like gas/liquid sensor. Also useful for
measuring data from Pressure sensor, Strain Gauge Sensor,
Temperature Sensor, Level Sensor, Position Sensor etc.
Specification
–
Temperature Sensor, Level Sensor, Position Sensor etc..,
measuring data from Pressure sensor, Strain Gauge Sensor,
analog input variants like gas/liquid sensor. Also useful for
This device is handy for testing Sensor data with PLC’s
troubleshooting and application development.
maintenance personnel and integrators in analog input testing
The Analog Source Generator(0-20mA) will assist
- Functionality
Perfect 3 wire 0-20mA Signal Source Generator - Protection
Input Reverse Polarity , Output Short Circuit Protection
DIMENSION
Product size – 48x48x90mm. Weight ~ 150 gms
Electrical characteristics
Power Supply
24V DC External
Display
4 digit Segment display
Current Output
Output Range 0/4-20mA
Output Accuracy ±1% of full scale
Load range 10 Ω ~ 1.1k Ω
| Dimensions | 60mm x 40mm x 20mm |
|---|---|
| Part No | USS20M24V-D |
| Brand | Veawe |
| Mounting Type | DIN Rail |
| Warranty | 1 Year |
| Country of Origin | Made in India |
You may also like…
4-20mA Surge Protection Device SPD 4 to 20mA
- Three-stage SPD-20mA surge protection device meets standard
protection against power surges, voltage surges and
disturbances with three stages of protection.
- Housed in a din rail panel mount case with a protected earth
ground.
- In order to work properly, it is important to have a good
connection in E terminal to solid earth ground.
- Unknown electronic device failure and misbehave in controller
units might be avoided by using SPD-20mA
Features:
Protection provided by high energy MOV and TVS
Replaceable modular design, DIN Rail compatible base
All types of 20mA current loop devices, Also works for HART
interface
Where to Use:
*Noisy industrial lines like DC inductive load switching
*Industrial power panels
*Solar plants
*Gas stations
Dual Output Current Source Simulator 0 to 20mA
Perfect 3 wire 0-20mA Signal Source Generator – Dual
Output
Power Supply
24V DC External
Current Output
Output Range 0/4-20mA
Output Accuracy ±1% of full scale
Load range 10 Ω ~ 1.1k Ω
Protection
Input Reverse Polarity, Output Short Circuit Protection
DIMENSION
Product size 70 x 50 x 85 mm
Din rail mountable
Variable using 5 turns Potentiometer.
Selectable range 0 mA ~ 20 mA in 0.01mA steps
resolution or more.
0 ~ 20mA or 4 ~ 20mA selection by external jumper.
Current output values are set by rotating the knob.
Loop Current Source Simulator
The Analog Source Generator(4-20mA) will assist
maintenance personnel and integrators in analog input testing
troubleshooting and application development.
This device is handy for testing Sensor data with PLC’s
analog input variants like gas/liquid sensor. Also useful for
measuring data from Pressure sensor, Strain Gauge Sensor,
Temperature Sensor, Level Sensor, Position Sensor etc.
Voltage Source Simulator 0-10V (USS10V24V-D)
The Analog Source Generator(0-10v) will assist
maintenance personnel and integrators in analog input testing
troubleshooting and application development.
This device is handy for testing Sensor data with PLC’s
analog input variants like gas/liquid sensor. Also useful for
measuring data from Pressure sensor, Strain Gauge Sensor,
Temperature Sensor, Level Sensor, Position Sensor etc..,
SPECIFICATION
Functionality
Perfect 0-10v Signal Source Generator
Power Supply
24V DC External
Display
4 digit Segment display
Voltage Output
Output Range 0-10V DC
Output Accuracy ±1% of full scale
Load range 100mA Max
Protection
Input Reverse Polarity , Output Short Circuit Protection
DIMENSION
Product size 48x48x90mm.
Preffered Panel cut out 45x45mm.
Related products
DLMS to Modbus Converter
Features
- Supports reading of Cumulative Parameters, Insta Voltage and Current Values and Meter Serial No.
- RS485/RS232/Optical DLMS to RS485 Modbus converter
- 24V DC Input
- Modbus RS-485 Protocol Interface
- Convenient address selection rotatory switch from 1 – 99 Address for modbus
- Complete range of configurable baud rate settings supported for modbus
- Din Rail mounting
- Product Dimensions – 40mm x 110mm x 80mm (L x W x H)
Ethernet to RS485 Converter UC-ETH-RS485
Features
- Works with all type of industrial equipments
– PC, PLC, SCADA, HMI, AC/DC Drives, Genset, UPS, Development Kits, etc.
RS485 Rx and Tx light indications for easy visibility and troubleshooting
RJ45 Status light indications, RJ45 built-in 2KV isolation
Easy to use web page configuration option
Unique MAC address
Compact design suitable for both DIN Rail and Wall mount
Support 10/100M, TCP Server, TCP Client, UDP, Httpd Client, Web socket
Supports Transparent Mode data transmission
Supports Modbus TCP to Modbus RTU protocol conversion
ESD and Surge protection for Ethernet, RS485 and Power
Supports all Baud Rates from 300 to 250 kBaud.– varies on cable length
Supports up-to 256 receivers on the bus
– also depends on the other devices connected in the RS485 network
- ESD protection for RS485 pins
– ±15-kV Human-Body Model (HBM)
– ±8-kV IEC1000-4-2, Contact Discharge
– ±15-kV IEC1000-4-2, Air-Gap Discharge
- 1 Year Warranty against any manufacturing defects
Industrial Isolated USB Repeater UC-ISO-USB-24V
- 5 kV RMS Galvanic Isolation: Complete optical and galvanic protection shielding host PCs and PLCs from high-voltage field transients and ground loops.
- 1,500 Vrms Working Voltage: Industrial working voltage barrier between host and downstream peripheral equipment.
- External 24V DC Industrial Power: Downstream circuit and peripheral powered by a rugged 12–28V DC industrial field supply (provides clean 5V DC @ 500mA to USB device).
- USB Type-C Host & Type-A Device Ports: Modern, reversible Type-C connection to PC host and robust Type-A receptacle for industrial peripherals.
- Full & Low Speed USB Auto-Switching: Compatible with USB 2.0 Full Speed (12 Mbps) and Low Speed (1.5 Mbps) industrial devices without jumper configuration.
- Comprehensive Surge & ESD Protection: Built-in 600W TVS clamping, ±15 kV ESD (IEC 61000-4-2), and 12A lightning surge suppression (IEC 61000-4-5).
- Dual LED Power Diagnostics: Dedicated power indicator LEDs for both Host and Device domains for instant troubleshooting.
- Compact DIN Rail Mounting: Enclosed in a compact 60 mm x 50 mm x 20 mm industrial housing with an integrated 35 mm DIN rail clip.
Isolated Analog Signal Converter 10V – 10V
Features:-
2 Way isolation up to 1KVrms
Compact design suitable for both DIN Rail and wall
mount
1 Year Warranty against any manufacturing defects.
Customizable Input voltages available on order
Input Signal type : 0-10V DC
Output Signal type : 0-10V DC
Accuracy : Less than +/- 1% @ 25°C ambient temperature
Input Supply Voltage : 24V DC
Isolated Analog Signal Converter 150V to 20mA
Features:-
2 Way isolation up to 1KVrms
Compact design suitable for both DIN Rail and wall
mount
1 Year Warranty against any manufacturing defects.
Customizable Input voltages available on order
Input Signal type : 0-150V DC
Output Signal type : 4-20mA DC
Accuracy : Less than +/- 1% @ 25°C ambient temperature
Input Supply Voltage : 24V DC
RS232 to RS485 Converter
Connecting to Industrial Field buses, remote devices to a latest Computer becomes
difficult due to obsolete of the RS232C ports by Computer Manufactures. But with the vast
use of equipments with these interfaces needs a connection with PC for monitoring,
configuring and working. Most of the market available converters are not equipments with
proper ESD protection circuits to work longer and with an industry equipment. So we have our
most suitable converter for both Industrial environment and general usage.
Supports Auto-Direction Control. No flow control signal required.
Supports all Baud Rates from 300 to 250 kBaud.
– actual baud rate varies on the cable length
- Supports up-to 256 receivers on the bus
– also depends on the other devices connected in the RS485 network
- Works with all type of industrial equipments
– PC, PLC, SCADA, HMI, AC/DC Drives, Genset, UPS, Development Kits, etc.
RS485 Rx and Tx light indications for easy visibility and troubleshooting
ESD protection for RS232 and RS485 pins
– ±15-kV Human-Body Model (HBM)
– ±8-kV IEC1000-4-2, Contact Discharge
– ±15-kV IEC1000-4-2, Air-Gap Discharge
Very compact size 60mm x 40mm x 20mm
1 Year Warranty against any manufacturing defects
Reviews
There are no reviews yet.