Voltage Source Simulator 0-10V (USS10V2...
Voltage Source Simulator 0-10V USS10V24V-D
The USS10V24V-D is a precision 0–10V DC analog voltage source generator equipped with a bright 4-digit 7-segment LED display. Designed to assist instrumentation engineers, technicians, and system integrators during panel commissioning and maintenance, it provides an accurate, stable voltage reference to test and calibrate PLC analog input channels, HMI readouts, VFD speed setpoints, and industrial transducers.
Key Features
- 0–10V DC precision analog voltage generation
- 4-digit 7-segment LED display with 0.01V readout resolution
- 5-turn precision wirewound potentiometer for fine adjustment (≤ 0.01V steps)
- Up to 100 mA output current drive capability
- Short-circuit and input reverse polarity protection
- 24V DC auxiliary power supply input
- Standard 48 mm × 48 mm panel mount enclosure
- Fits standard 45 mm × 45 mm panel cutouts with side retaining clips
- Dimensions: 48 mm × 48 mm × 90 mm
Ordering Information
| Product Code | Description |
|---|---|
| USS10V24V-D | Voltage Source Simulator 0-10V (with 4-Digit Display, 24V DC, Panel Mount) |
| USS20M24V-D | Current Source Simulator 0/4 to 20mA (with 4-Digit Display, 24V DC) |
| USS20M24V-P | Current Source Simulator 0/4 to 20mA (Without Display, 24V DC) |
| USS20M24V-2P | Dual Output Current Source Simulator (DIN Rail Mountable, 24V DC) |
| ULS20M24V-P | Loop Current Source Simulator 4-20mA (2-Wire, Panel Mount) |
| SPD-24V-DC | Surge Protection Device 24V DC SPD |
Applications
- PLC & DCS Analog Voltage Input Testing: Simulating 0–10V sensor outputs to verify scaling, calibration, and alarm setpoints on automation controllers.
- VFD & Drive Commissioning: Injecting 0–10V analog speed reference signals into variable frequency drives and servo amplifiers.
- Valve Positioner & Damper Testing: Calibrating 0–10V motorized control valves, dampers, and proportional actuator positioners.
- Bench Calibration & Maintenance: Portable or benchtop reference source for troubleshooting analog transducers, panel meters, and data loggers.
Specifications
| Parameter | Value |
|---|---|
| Mounting Type | Panel Mounting (with side clamping brackets) |
| Dimensions | 48 mm x 48 mm x 90 mm (W x H x D) |
| Preferred Panel Cutout | 45 mm x 45 mm |
| Weight | Approximately 150 g |
| Enclosure Material | Industrial Grade ABS |
| Operating Temperature | -10 °C to +60 °C |
| Storage Temperature | -40 °C to +85 °C |
| Relative Humidity | 5% to 95% RH (non-condensing) |
Electrical Specifications
| Parameter | Specification |
|---|---|
| Power Supply | 24V DC External |
| Display Type | 4-digit red 7-segment LED display |
| Output Voltage Range | 0.00 V to 10.00 V DC |
| Output Accuracy | \(\pm 1\%\) of Full Scale |
| Adjustment Mechanism | 5-turn wirewound precision potentiometer |
| Adjustment Resolution | \(0.01\text{V}\) step resolution |
| Maximum Output Load | 100 mA Max |
| Reverse Polarity Protection | Integrated series protection diode |
| Short Circuit Protection | Continuous electronic current limiting |
Mechanical Dimensions
| Parameter | Value |
|---|---|
| Bezel Dimensions | 48 mm x 48 mm (W x H) |
| Depth Behind Panel | 90 mm (including rear terminals) |
| Panel Cutout | 45 mm x 45 mm (+0.5 mm) |
| Mounting Type | 1/16 DIN Panel Mount with side clamping brackets |
Terminal Details & Wiring
Terminal Connections
The USS10V24V-D features a rear screw terminal strip for DC power input and active voltage output.
| Terminal Pin | Label | Function | Description |
|---|---|---|---|
| 1 | 1 V+ | DC Power Positive | +24V DC Power Supply Input |
| 2 | 2 V- | DC Power Negative | 0V / Ground Return |
| 3 | 3 + | Voltage Output (+) | 0–10V DC Analog Output Signal |
| 4 | 4 - | Voltage Output (-) | Analog Signal Ground Return |
Revision History
| Revision | Date | Description of Change |
|---|---|---|
| Rev 1.0 | 2026-09-09 | Initial datasheet release |
Get the latest version of this datasheet : click here..
Support
Website: www.veawe.io
Email: info@veawe.io